AA Standards Grade 2011 T4511

Want to keep this datasheet? Save it now in your required format

Description

Aluminum AA 2011 is a popular age-hardenable alloy known for its free-machining characteristics and mechanical properties. It can be machined to very close tolerances while still maintaining a smooth and bright finish. Unlike other aluminum alloys, AA 2011 does not offer good corrosion resistance or weldability.

Related Standards

Equivalent Materials

This material data has been provided by AluKey,MakeItFrom.com.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionRelated Standards

Density

2.83 g/cm³

Show Material materials with Density of 2.83 g/cm³

T4511

AA Standards, ASTM B210

3.1 g/cm³

Show Material materials with Density of 3.1 g/cm³

T4511

Mechanical

PropertyValueConditionRelated StandardsComment

Elastic modulus

70.0 GPa

Show Material materials with Elastic modulus of 70.0 GPa

T4511

AA Standards, ASTM B210

Elongation

20.0 %

Show Material materials with Elongation of 20.0 %

T4511

AA Standards, ASTM B210

A50

18.0 %

Show Material materials with Elongation of 18.0 %

T4511

AA Standards, ASTM B210

A50

18.0 %

Show Material materials with Elongation of 18.0 %

T4511

AA Standards, ASTM B210

A100

16.0 %

Show Material materials with Elongation of 16.0 %

T4511

AA Standards, ASTM B210

A100

18.0 %

Show Material materials with Elongation of 18.0 %

T4511

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 2000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 2000 Series Aluminium

Shear modulus

26.0 - 27.5 GPa

Show Material materials with Shear modulus of 26.0 - 27.5 GPa

Typical for Wrought 2000 Series Aluminium

Tensile strength

305.0 MPa

Show Material materials with Tensile strength of 305.0 MPa

T4511

AA Standards, ASTM B210

350.0 MPa

Show Material materials with Tensile strength of 350.0 MPa

T4511

Yield strength

170.0 MPa

Show Material materials with Yield strength of 170.0 MPa

T4511

AA Standards, ASTM B210

RP02

200.0 MPa

Show Material materials with Yield strength of 200.0 MPa

T4511

Thermal

PropertyTemperatureValueConditionRelated Standards

Coefficient of thermal expansion

2.3e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.3e-05 1/K

T4511

100 °C, 20 °C

2.2899999999999998e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.2899999999999998e-05 1/K

T4511

AA Standards, ASTM B210

Melting point

540.0 - 645.0 °C

Show Material materials with Melting point of 540.0 - 645.0 °C

T4511

AA Standards, ASTM B210

540.0 °C

Show Material materials with Melting point of 540.0 °C

T4511

Specific heat capacity

860.0 J/(kg·K)

Show Material materials with Specific heat capacity of 860.0 J/(kg·K)

T4511

Thermal conductivity

151.0 - 172.0 W/(m·K)

Show Material materials with Thermal conductivity of 151.0 - 172.0 W/(m·K)

T4511

AA Standards, ASTM B210

Electrical

PropertyValueConditionRelated Standards

Electrical conductivity

23000000.0 - 26000000.0 S/m

Show Material materials with Electrical conductivity of 23000000.0 - 26000000.0 S/m

T4511

AA Standards, ASTM B210

Electrical resistivity

3.85e-08 - 4.35e-08 Ω·m

Show Material materials with Electrical resistivity of 3.85e-08 - 4.35e-08 Ω·m

T4511

AA Standards, ASTM B210

Chemical properties

PropertyValueConditionRelated Standards

Aluminium

91.3 - 94.6 %

Show Material materials with Aluminium of 91.3 - 94.6 %

T4511

Bismuth

0.2 - 0.6 %

Show Material materials with Bismuth of 0.2 - 0.6 %

T4511

AA Standards, ASTM B210

Copper

5.0 - 6.0 %

Show Material materials with Copper of 5.0 - 6.0 %

T4511

AA Standards, ASTM B210

Iron

0.70 %

Show Material materials with Iron of 0.70 %

T4511

AA Standards, ASTM B210

0.7 %

Show Material materials with Iron of 0.7 %

T4511

Lead

0.2 - 0.6 %

Show Material materials with Lead of 0.2 - 0.6 %

T4511

AA Standards, ASTM B210

Other

0.15 %

Show Material materials with Other of 0.15 %

T4511

Silicon

0.4 %

Show Material materials with Silicon of 0.4 %

T4511

AA Standards, ASTM B210

Zinc

0.3 %

Show Material materials with Zinc of 0.3 %

T4511

AA Standards, ASTM B210

Technological properties

Property
Brazing

general: no brazing is known or developed

Corrosion properties

Stress corrosion cracking: Limited operational damage(T3, T4, T451), no damage during operation, limited damage during laboratory tests (T8), general: sufficient, in principle it should be protected

General machinability

General: very good

Workability

general (condition): poor(T3), acceptable (T4, T451), d (T8)