Properties
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Density | 23.0 °C | 1.42 g/cm³ Show Supplier Material materials with Density of 1.42 g/cm³ | ASTM D792 |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongation | 23.0 °C | 5.1 % Show Supplier Material materials with Elongation of 5.1 % | ASTM D638 |
Flexural modulus | 23.0 °C | 1.71 GPa Show Supplier Material materials with Flexural modulus of 1.71 GPa | ASTM D790 |
Flexural strength | 23.0 °C | 310 MPa Show Supplier Material materials with Flexural strength of 310 MPa | ASTM D790 |
Impact strength, Izod notched, ASTM | 23.0 °C | 18 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 18 J/m | ASTM D256, 3.2mm |
Tensile strength | 23.0 °C | 49 MPa Show Supplier Material materials with Tensile strength of 49 MPa | ASTM D638 |
Thermal
| Property | Value | Comment | |
|---|---|---|---|
Heat deflection temperature, 0.45 MPa | 320 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 320 °C | ASTM D648 | |
Flammability | V2 UL94 | ||
Electrical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Surface resistivity | 23.0 °C | 1000 - 100000 Ω/sq Show Supplier Material materials with Surface resistivity of 1000 - 100000 Ω/sq | ASTM D257 |
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Melt mass-flow rate | 7.5 g/10min Show Supplier Material materials with Melt mass-flow rate of 7.5 g/10min | ASTM D1238, 230°C/5kg | |
Shrinkage | 23.0 °C | 0.15 - 0.2 % Show Supplier Material materials with Shrinkage of 0.15 - 0.2 % | ASTM D1238, Mold Shrinkage |
Technological properties
| Property | ||
|---|---|---|
| Application areas | ESD IC tray, ESD lens tray, Conductive tweenzers, ESD container, ESD electric & housing spare parts, Conductive communication equipment | |
| Certifications | RoHS | |
| Color | Black | |
| Processing methods | Injection molding - Drying time: 4hrs, temperature: 120°C - Mold temperature:100-120°C - injection temperature: 120°C | |