General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.11 g/cm³ Show Supplier Material materials with Density of 1.11 g/cm³ | ASTM D792 |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elongation | 23.0 °C | 37 % Show Supplier Material materials with Elongation of 37 % | ASTM D638 |
Flexural modulus | 23.0 °C | 1.44 GPa Show Supplier Material materials with Flexural modulus of 1.44 GPa | ASTM D790 |
Flexural strength | 23.0 °C | 63 MPa Show Supplier Material materials with Flexural strength of 63 MPa | ASTM D790 |
Impact strength, Izod notched, ASTM | 23.0 °C | 13 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 13 J/m | ASTM D256 |
Tensile strength | 23.0 °C | 34 MPa Show Supplier Material materials with Tensile strength of 34 MPa | ASTM D638 |
Thermal
Property | Value | Comment |
---|---|---|
Heat deflection temperature, 0.45 MPa | 73 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 73 °C | ASTM D648 |
Electrical
Property | Temperature | Value | Comment |
---|---|---|---|
Surface resistivity | 23.0 °C | 1.00E+8 - 1.00E+9 Ω/sq Show Supplier Material materials with Surface resistivity of 1.00E+8 - 1.00E+9 Ω/sq | ASTM D257 |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Melt mass-flow rate | 17.28 g/10min Show Supplier Material materials with Melt mass-flow rate of 17.28 g/10min | ASTM D1238, 230°C/5kg | |
Shrinkage | 23.0 °C | 0.94 % Show Supplier Material materials with Shrinkage of 0.94 % | ASTM D1238, Mold Shrinkage |
Technological properties
Property | ||
---|---|---|
Certifications | RoHS | |
Processing methods | Injection molding - Drying time: 4hrs, temperature: 80°C - Injection temperature: 180-220°C |