HIPS IT 43

Alternative and trade names
IT 43, PS-I

Want to keep this datasheet? Save it now in your required format

Description

High Impact Polystyrene (HIPS) that indicates good flow.

This material data has been provided by Toling Corporation Sdn Bhd .

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	1.04 g/cm³ Show Supplier Material materials with Density of 1.04 g/cm³	ASTM D792
Water absorption	23.0 °C	0.1 % Show Supplier Material materials with Water absorption of 0.1 %	maximum, ASTM D570

Mechanical

Property	Temperature	Value	Comment
Elongation	23.0 °C	35 % Show Supplier Material materials with Elongation of 35 %	ASTM D638
Flexural modulus	23.0 °C	1.91 GPa Show Supplier Material materials with Flexural modulus of 1.91 GPa	ASTM D790
Flexural strength	23.0 °C	45.1 MPa Show Supplier Material materials with Flexural strength of 45.1 MPa	ASTM D 790
Hardness, Rockwell L	23.0 °C	50 [-] Show Supplier Material materials with Hardness, Rockwell L of 50 [-]	ASTM D785
Tensile strength	23.0 °C	24.52 MPa Show Supplier Material materials with Tensile strength of 24.52 MPa	ASTM D638

Thermal

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	83 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 83 °C	ASTM D648
Vicat softening temperature	106 °C Show Supplier Material materials with Vicat softening temperature of 106 °C	ASTM D1525
Flammability	HB UL94

Rheological Properties

Property	Value	Comment
Melt mass-flow rate	8.5 g/10min Show Supplier Material materials with Melt mass-flow rate of 8.5 g/10min	ASTM D1238

Technological properties

Property
Application areas	Compounding grades

HIPS IT 43

Description

Ashby charts

Materials by this supplier

Properties