DIN 1712-3 Grade 3.0205 H18

Want to keep this datasheet? Save it now in your required format

Description

Pure aluminium This material is well anodically oxidizable and has a good electrical and thermal conductivity. The splinter-giving workability is bad because of danger of smearing. Its mechanical strength is low, the plasticity high. The forming capacity and the chemical as well as weather proofness are excellent. The materialist it for welding and braze welding well suitably. Application: Apparatus engineering, roll bond, z-bond, household devices, camp and tansport tanks for the chemical, pharmaceutical and food industry, roofings, linings, arts and crafts, packing, flow pressed parts (tubes, tube, doses, bottles), metal goods, motor vehicle characteristics.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Condition	Related Standards	Shape
Density		2.71 g/cm³ Show Material materials with Density of 2.71 g/cm³	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754
	20.0 °C	2.71 g/cm³ Show Material materials with Density of 2.71 g/cm³	H18	DIN 1712-3, EN 573-3, EN 573-4	Rod, Sheet, Strip, Tube, Wire

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Bending Fatigue Strength		65.0 MPa Show Material materials with Bending Fatigue Strength of 65.0 MPa	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754
Bending angle 90°		1.0 °/t Show Material materials with Bending angle 90° of 1.0 °/t	H18	EN 573-3, EN 485
		2.0 °/t Show Material materials with Bending angle 90° of 2.0 °/t	H18	EN 573-3, EN 485
		3.0 °/t Show Material materials with Bending angle 90° of 3.0 °/t	H18	EN 573-3, EN 485
Elastic modulus		69.0 GPa Show Material materials with Elastic modulus of 69.0 GPa	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754
	20.0 °C	60.0 - 65.0 GPa Show Material materials with Elastic modulus of 60.0 - 65.0 GPa	H18	DIN 1712-3, EN 573-3, EN 573-4	Rod, Sheet, Strip, Tube, Wire
Elongation		1.0 % Show Material materials with Elongation of 1.0 %	H18	EN 573-3, EN 485, EN 546, EN 683		A50
		2.0 % Show Material materials with Elongation of 2.0 %	H18	EN 573-3, EN 485		A50
		3.0 % Show Material materials with Elongation of 3.0 %	H18	EN 573-3, EN 754		A100
		3.0 % Show Material materials with Elongation of 3.0 %	H18	EN 573-3, EN 754		A50
	20.0 °C	1.0 % Show Material materials with Elongation of 1.0 %	H18	DIN 1712-3, EN 573-3, EN 573-4	Wire	A100
	20.0 °C	2.0 % Show Material materials with Elongation of 2.0 %	H18	DIN 1712-3, EN 573-3, EN 573-4	Rod, Tube, Wire	A10
	20.0 °C	3.0 % Show Material materials with Elongation of 3.0 %	H18	DIN 1712-3, EN 573-3, EN 573-4	Sheet, Strip	A10
	20.0 °C	3.0 % Show Material materials with Elongation of 3.0 %	H18	DIN 1712-3, EN 573-3, EN 573-4	Rod, Tube
	20.0 °C	4.0 % Show Material materials with Elongation of 4.0 %	H18	DIN 1712-3, EN 573-3, EN 573-4	Sheet, Strip
Hardness, Brinell		45.0 [-] Show Material materials with Hardness, Brinell of 45.0 [-]	H18	EN 573-3, EN 485
	20.0 °C	38.0 [-] Show Material materials with Hardness, Brinell of 38.0 [-]	H18	DIN 1712-3, EN 573-3, EN 573-4	Tube
	20.0 °C	40.0 [-] Show Material materials with Hardness, Brinell of 40.0 [-]	H18	DIN 1712-3, EN 573-3, EN 573-4	Rod, Wire
	20.0 °C	42.0 [-] Show Material materials with Hardness, Brinell of 42.0 [-]	H18	DIN 1712-3, EN 573-3, EN 573-4	Sheet, Strip
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 1000 Series Aluminium
Poisson's ratio		0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-]				Typical for Wrought 1000 Series Aluminium
Shear modulus		25.9 GPa Show Material materials with Shear modulus of 25.9 GPa	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754
	20.0 °C	24.0 - 26.0 GPa Show Material materials with Shear modulus of 24.0 - 26.0 GPa	H18	DIN 1712-3, EN 573-3, EN 573-4	Rod, Sheet, Strip, Tube, Wire
Tensile strength		140.0 MPa Show Material materials with Tensile strength of 140.0 MPa	H18	EN 573-3, EN 546, EN 683
		140.0 - 200.0 MPa Show Material materials with Tensile strength of 140.0 - 200.0 MPa	H18	EN 573-3, EN 546
		150.0 MPa Show Material materials with Tensile strength of 150.0 MPa	H18	EN 573-3, EN 485, EN 754
	20.0 °C	140.0 MPa Show Material materials with Tensile strength of 140.0 MPa	H18	DIN 1712-3, EN 573-3, EN 573-4	Rod, Tube
	20.0 °C	140.0 - 180.0 MPa Show Material materials with Tensile strength of 140.0 - 180.0 MPa	H18	DIN 1712-3, EN 573-3, EN 573-4	Sheet, Strip
	20.0 °C	150.0 MPa Show Material materials with Tensile strength of 150.0 MPa	H18	DIN 1712-3, EN 573-3, EN 573-4	Wire

Thermal

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coefficient of thermal expansion	-50 °C	2.17e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.17e-05 1/K	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754, DIN 1712-3, EN 573-4	Rod, Sheet, Strip, Tube, Wire
	-50.0 °C	2.17e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.17e-05 1/K	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754, DIN 1712-3, EN 573-4	Rod, Sheet, Strip, Tube, Wire
	20 °C	2.17e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.17e-05 1/K	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754, DIN 1712-3, EN 573-4	Rod, Sheet, Strip, Tube, Wire
	20 °C	2.35e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.35e-05 1/K	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754, DIN 1712-3, EN 573-4	Rod, Sheet, Strip, Tube, Wire
	20 °C	2.4399999999999997e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.4399999999999997e-05 1/K	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754
	20 °C	2.5399999999999997e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.5399999999999997e-05 1/K	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754
	100 °C	2.35e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.35e-05 1/K	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754, DIN 1712-3, EN 573-4	Rod, Sheet, Strip, Tube, Wire
	100.0 °C	2.35e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.35e-05 1/K	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754, DIN 1712-3, EN 573-4	Rod, Sheet, Strip, Tube, Wire
	200 °C	2.4399999999999997e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.4399999999999997e-05 1/K	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754
	200.0 °C	2.44e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.44e-05 1/K	H18	DIN 1712-3, EN 573-3, EN 573-4	Rod, Sheet, Strip, Tube, Wire
	300 °C	2.5399999999999997e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.5399999999999997e-05 1/K	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754
	300.0 °C	2.54e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.54e-05 1/K	H18	DIN 1712-3, EN 573-3, EN 573-4	Rod, Sheet, Strip, Tube, Wire
Melting point		644.0 - 657.0 °C Show Material materials with Melting point of 644.0 - 657.0 °C	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754
Specific heat capacity		900.0 - 963.0 J/(kg·K) Show Material materials with Specific heat capacity of 900.0 - 963.0 J/(kg·K)				Typical for Wrought 1000 Series Aluminium
Thermal conductivity	20.0 °C	205.0 - 210.0 W/(m·K) Show Material materials with Thermal conductivity of 205.0 - 210.0 W/(m·K)	H18	DIN 1712-3, EN 573-3, EN 573-4, EN 485, EN 546, EN 683, EN 754	Rod, Sheet, Strip, Tube, Wire

Electrical

Property	Temperature	Value	Condition	Related Standards	Shape
Electrical conductivity		33000000.0 - 34000000.0 S/m Show Material materials with Electrical conductivity of 33000000.0 - 34000000.0 S/m	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754
	20.0 °C	34400000.0 - 35500000.0 S/m Show Material materials with Electrical conductivity of 34400000.0 - 35500000.0 S/m	H18	DIN 1712-3, EN 573-3, EN 573-4	Rod, Sheet, Strip, Tube, Wire
Electrical resistivity		2.94e-08 - 3.03e-08 Ω·m Show Material materials with Electrical resistivity of 2.94e-08 - 3.03e-08 Ω·m	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754

Chemical properties

Property	Value	Condition	Related Standards	Shape
Aluminium	99.0 % Show Material materials with Aluminium of 99.0 %	H18	EN 573-3, EN 485, EN 546, EN 683, EN 754
Copper	0.05 % Show Material materials with Copper of 0.05 %	H18	DIN 1712-3, EN 573-3, EN 573-4, EN 485, EN 546, EN 683, EN 754	Rod, Sheet, Strip, Tube, Wire
Magnesium	0.05 % Show Material materials with Magnesium of 0.05 %	H18	DIN 1712-3, EN 573-3, EN 573-4, EN 485, EN 546, EN 683, EN 754	Rod, Sheet, Strip, Tube, Wire
Manganese	0.05 % Show Material materials with Manganese of 0.05 %	H18	DIN 1712-3, EN 573-3, EN 573-4, EN 485, EN 546, EN 683, EN 754	Rod, Sheet, Strip, Tube, Wire
Titanium	0.05 % Show Material materials with Titanium of 0.05 %	H18	DIN 1712-3, EN 573-3, EN 573-4, EN 485, EN 546, EN 683, EN 754	Rod, Sheet, Strip, Tube, Wire
Zinc	0.1 % Show Material materials with Zinc of 0.1 %	H18	DIN 1712-3, EN 573-3, EN 573-4, EN 485, EN 546, EN 683, EN 754	Rod, Sheet, Strip, Tube, Wire

Technological properties

Property
Anodizing	decorative: acceptable, Protective: very good
Brazing	hard brazing (with flux/ without flux): very good / very good, friction soldering: very good, soft brazing with flux: very good
Corrosion properties	Seawater: sufficient, weathering: acceptable
Workability	Bending / Spinning (cold): very good / very good, Impact extrusion (cold): very good, Deep drawing / upsetting (Condition) very good (H12) / very good (H12)