DIN 1725-1 Grade 3.0505 O

Want to keep this datasheet? Save it now in your required format

Description

The alloy AlMn0,5Mg0,5 is special one for the packing planned alloy. The alloy belongs to the nature-hard aluminum materials. A strength increase can only occur by cold forming. It is very well warm and cold formable and is very well suitable to the deep-drawing (no lappet formation). Because of the good Erichsen index and the relatively high strength (F 24), it finds in addition in architecture use. Standardised is this alloy as sheet metal or strip with a thickness of max. 0,35 mm (DIN 1788). Application: In the packing for menu bowls, light container, bottle caps, doses dose covers as well as in architecture as profile boards for roofs and wall linings and for shutters and suspended covers. For heat exchangers and flexible pipes.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Condition	Related Standards	Shape
Density		2.71 g/cm³ Show Material materials with Density of 2.71 g/cm³	O	EN 573-3, EN 1396, EN 485
		2.72 g/cm³ Show Material materials with Density of 2.72 g/cm³	O	EN 573-3, EN 1396, EN 485
	20.0 °C	2.71 g/cm³ Show Material materials with Density of 2.71 g/cm³	O	DIN 1725-1, EN 573-3, EN 573-4	Flat

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Bending angle 180°		0.5 °/t Show Material materials with Bending angle 180° of 0.5 °/t	O	EN 573-3, EN 485
Elastic modulus		69.0 GPa Show Material materials with Elastic modulus of 69.0 GPa	O	EN 573-3, EN 1396, EN 485
		70.0 GPa Show Material materials with Elastic modulus of 70.0 GPa	O	EN 573-3, EN 1396, EN 485
Hardness, Brinell		29.0 [-] Show Material materials with Hardness, Brinell of 29.0 [-]	O	EN 573-3, EN 485
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 3000 Series Aluminium
Poisson's ratio		0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-]				Typical for Wrought 3000 Series Aluminium
Shear modulus		25.0 - 26.0 GPa Show Material materials with Shear modulus of 25.0 - 26.0 GPa				Typical for Wrought 3000 Series Aluminium
Tensile strength		100.0 - 155.0 MPa Show Material materials with Tensile strength of 100.0 - 155.0 MPa	O	EN 573-3, EN 1396, EN 485
	20.0 °C	110.0 - 150.0 MPa Show Material materials with Tensile strength of 110.0 - 150.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4	Flat

Thermal

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coefficient of thermal expansion	20 °C	2.36e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.36e-05 1/K	O	EN 573-3, EN 1396, EN 485
	100 °C	2.36e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.36e-05 1/K	O	EN 573-3, EN 1396, EN 485
Melting point		635.0 - 655.0 °C Show Material materials with Melting point of 635.0 - 655.0 °C	O	EN 573-3, EN 1396, EN 485
		640.0 - 655.0 °C Show Material materials with Melting point of 640.0 - 655.0 °C	O	EN 573-3, EN 1396, EN 485
Specific heat capacity		893.0 - 920.0 J/(kg·K) Show Material materials with Specific heat capacity of 893.0 - 920.0 J/(kg·K)				Typical for Wrought 3000 Series Aluminium
Thermal conductivity		160.0 - 190.0 W/(m·K) Show Material materials with Thermal conductivity of 160.0 - 190.0 W/(m·K)	O	EN 573-3, EN 1396, EN 485
		172 W/(m·K) Show Material materials with Thermal conductivity of 172 W/(m·K)	O	EN 573-3, EN 1396, EN 485
	20.0 °C	180.0 - 190.0 W/(m·K) Show Material materials with Thermal conductivity of 180.0 - 190.0 W/(m·K)	O	DIN 1725-1, EN 573-3, EN 573-4	Flat

Electrical

Property	Temperature	Value	Condition	Related Standards	Shape
Electrical conductivity		23000000.0 - 26000000.0 S/m Show Material materials with Electrical conductivity of 23000000.0 - 26000000.0 S/m	O	EN 573-3, EN 1396, EN 485
		26000000.0 S/m Show Material materials with Electrical conductivity of 26000000.0 S/m	O	EN 573-3, EN 1396, EN 485
	20.0 °C	25000000.0 - 27000000.0 S/m Show Material materials with Electrical conductivity of 25000000.0 - 27000000.0 S/m	O	DIN 1725-1, EN 573-3, EN 573-4	Flat
Electrical resistivity		3.85e-08 Ω·m Show Material materials with Electrical resistivity of 3.85e-08 Ω·m	O	EN 573-3, EN 1396, EN 485
		3.85e-08 - 4.35e-08 Ω·m Show Material materials with Electrical resistivity of 3.85e-08 - 4.35e-08 Ω·m	O	EN 573-3, EN 1396, EN 485

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chromium	0.2 % Show Material materials with Chromium of 0.2 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485	Flat
Copper	0.3 % Show Material materials with Copper of 0.3 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485	Flat
Iron	0.7 % Show Material materials with Iron of 0.7 %	O	DIN 1725-1, EN 573-3, EN 573-4	Flat
	0.70 % Show Material materials with Iron of 0.70 %	O	EN 573-3, EN 1396, EN 485
Magnesium	0.2 - 0.8 % Show Material materials with Magnesium of 0.2 - 0.8 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485	Flat
Manganese	0.3 - 0.8 % Show Material materials with Manganese of 0.3 - 0.8 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485	Flat
Silicon	0.6 % Show Material materials with Silicon of 0.6 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485	Flat
Titanium	0.1 % Show Material materials with Titanium of 0.1 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485	Flat
Zinc	0.4 % Show Material materials with Zinc of 0.4 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485	Flat

Technological properties

Property

Workability

Good workability.