WL 3.3354 Grade 3.3354 O

Want to keep this datasheet? Save it now in your required format

Description

The alloy is characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a strength increase can be attained. It is well polishable and anodisable. The splinter-giving machinability becomes better with increasing Mg content, just as the weldability. AlMg5 has the highest Mg content of the standardized AlMg alloys, so it is badly cold formable, but the strength is the highest, so that the employment is possible for statically more highly loaded constructions. The alloy is suitable for a splinter-giving machinig on automats. It possesses sensitivity to intergranular corrosion. By a purposeful heat treatment and/or by additive of Mn or Cr the inclination to the intergranular corrosion can be reduced. Application: In the optics, in the automobile engineering for body parts, in mechanical engineering (turned parts). For joining elements (solid rivets, blind rivets, riveting nuts and screws). In the building industry for carrying constructions as well as in shipbuilding considering the sensitivity to corrosion.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Condition	Related Standards	Shape
Density		2.64 g/cm³ Show Material materials with Density of 2.64 g/cm³	O	WL 3.3354	Wire
	20.0 °C	2.64 g/cm³ Show Material materials with Density of 2.64 g/cm³	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Elastic modulus		71.0 GPa Show Material materials with Elastic modulus of 71.0 GPa	O	WL 3.3354	Wire
	20.0 °C	67.0 - 72.0 GPa Show Material materials with Elastic modulus of 67.0 - 72.0 GPa	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Elongation	20.0 °C	5.0 % Show Material materials with Elongation of 5.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Wire	A100
	20.0 °C	10.0 % Show Material materials with Elongation of 10.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Wire	A10
	20.0 °C	12.0 % Show Material materials with Elongation of 12.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod	A10
	20.0 °C	14.0 % Show Material materials with Elongation of 14.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod
	20.0 °C	14.0 % Show Material materials with Elongation of 14.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Tube	A10
	20.0 °C	16.0 % Show Material materials with Elongation of 16.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Tube
	20.0 °C	28.0 % Show Material materials with Elongation of 28.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	60.0 °C	28.0 % Show Material materials with Elongation of 28.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	100.0 °C	32.0 % Show Material materials with Elongation of 32.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	140.0 °C	40.0 % Show Material materials with Elongation of 40.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	180.0 °C	52.0 % Show Material materials with Elongation of 52.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	240.0 °C	64.0 % Show Material materials with Elongation of 64.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	300.0 °C	100.0 % Show Material materials with Elongation of 100.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	360.0 °C	104.0 % Show Material materials with Elongation of 104.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
Hardness, Brinell	20.0 °C	55.0 [-] Show Material materials with Hardness, Brinell of 55.0 [-]	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Wire
	20.0 °C	60.0 [-] Show Material materials with Hardness, Brinell of 60.0 [-]	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod
	20.0 °C	65.0 [-] Show Material materials with Hardness, Brinell of 65.0 [-]	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Tube
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Poisson's ratio		0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-]				Typical for Wrought 5000 Series Aluminium
Shear modulus	20.0 °C	27.0 GPa Show Material materials with Shear modulus of 27.0 GPa	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Shear strength	20.0 °C	150.0 MPa Show Material materials with Shear strength of 150.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Wire
Tensile strength	20.0 °C	250.0 MPa Show Material materials with Tensile strength of 250.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube
	20.0 °C	270.0 MPa Show Material materials with Tensile strength of 270.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Wire
	20.0 °C	280.0 MPa Show Material materials with Tensile strength of 280.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	100.0 °C	275.0 MPa Show Material materials with Tensile strength of 275.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	140.0 °C	235.0 MPa Show Material materials with Tensile strength of 235.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	180.0 °C	200.0 MPa Show Material materials with Tensile strength of 200.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	240.0 °C	140.0 MPa Show Material materials with Tensile strength of 140.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	300.0 °C	100.0 MPa Show Material materials with Tensile strength of 100.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	360.0 °C	55.0 MPa Show Material materials with Tensile strength of 55.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Thermal

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coefficient of thermal expansion	-50.0 °C	2.25e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.25e-05 1/K	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
	20 °C	2.31e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.31e-05 1/K	O	WL 3.3354	Wire
	100 °C	2.31e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.31e-05 1/K	O	WL 3.3354	Wire
	100.0 °C	2.41e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.41e-05 1/K	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
	200.0 °C	2.51e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.51e-05 1/K	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
	300.0 °C	2.61e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.61e-05 1/K	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Max service temperature		150.0 °C Show Material materials with Max service temperature of 150.0 °C				Typical for Wrought 5000 Series Aluminium
Melting point		565.0 - 640.0 °C Show Material materials with Melting point of 565.0 - 640.0 °C	O	WL 3.3354	Wire
Specific heat capacity		904.0 J/(kg·K) Show Material materials with Specific heat capacity of 904.0 J/(kg·K)	O	WL 3.3354	Wire
	20.0 °C	904.0 J/(kg·K) Show Material materials with Specific heat capacity of 904.0 J/(kg·K)	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Thermal conductivity	20.0 °C	110.0 - 140.0 W/(m·K) Show Material materials with Thermal conductivity of 110.0 - 140.0 W/(m·K)	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire

Electrical

Property	Temperature	Value	Condition	Related Standards	Shape
Electrical conductivity	20.0 °C	15000000.0 - 19000000.0 S/m Show Material materials with Electrical conductivity of 15000000.0 - 19000000.0 S/m	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Electrical resistivity		5.26e-08 - 6.67e-08 Ω·m Show Material materials with Electrical resistivity of 5.26e-08 - 6.67e-08 Ω·m	O	WL 3.3354	Wire

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chromium	0.2 % Show Material materials with Chromium of 0.2 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Copper	0.1 % Show Material materials with Copper of 0.1 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Iron	0.5 % Show Material materials with Iron of 0.5 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
	0.50 % Show Material materials with Iron of 0.50 %	O	WL 3.3354	Wire
Magnesium	4.5 - 5.6 % Show Material materials with Magnesium of 4.5 - 5.6 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Manganese	0.1 - 0.6 % Show Material materials with Manganese of 0.1 - 0.6 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Silicon	0.4 % Show Material materials with Silicon of 0.4 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Titanium	0.2 Show Material materials with Titanium of 0.2	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Zinc	0.2 % Show Material materials with Zinc of 0.2 %	O	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire

Technological properties

Property

Workability

Good workability.