EN 573-3 Grade 3.2315 O

Want to keep this datasheet? Save it now in your required format

Description

From the type of alloy AlMgSi is the alloy AlMgSi1 that, which used longest. This cold and/or hot hardenable material reaches strength values of 200 to 315 MPa with A5-elongation at break of approx. 6 to 18 %. In hot and cold-hardened condition is this alloy only limited formable, in the soft material condition however well. Weldability, corrosion resistance and anodising of this material are good. Although this alloy achieves the highest mechanical strength of all alloys of this type, it is used with priority due to its good corrosion resistance. Furthermore it, although the weldability is good, is used more for screwing and/or rivet joints, because within the welding seam range there is the danger of destabilizations. Heat treatment for hardening: solution annealing: 525 to 540 °C, quenching on air or in water cold ageing: 5 to 8 d at ambient temperature hot ageing: 4 to 16 h at 155 to 190 °C Application: For bearing constructions (loadedstatically according to DIN 4113), in the apparatus and tank construction for heat exchangers, for compressed gas bottles, technical flow pressed parts, in the automobile engineering for tank and silo trucks, for dump truck hollows, buses, body parts, for safety-related parts, wheels and superstructures. In mechanical engineering for devices, tools (baseplates, head and stamp retaining plates as well as guide plates), machine tables, hydraulic/pneumatics, shaft couplings (forging), roller pipes, brake disks and brake drums (with squirted wear course), liaison vehicles (screws according to DIN 267 T18, rivets), in food industry (including commercial devices), in the building of rail-mounted vehicles for railroad car doors, stroke sun roofs, wheel-center disks, axle box case, car boxes, in shipbuilding for the trunk, for superstructures, sail masts, equipment for radar, in the mining industry, in the building industry for rolling shutter, roll gates, for camping furniture and for metal goods (building fittings, table-ware, reflectors etc.).

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Condition	Related Standards	Shape
Density		2.7 g/cm³ Show Material materials with Density of 2.7 g/cm³	O	EN 573-3, EN 1386, EN 485, EN 754, EN 755
	20.0 °C	2.7 g/cm³ Show Material materials with Density of 2.7 g/cm³	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493	Sheet, Strip, Wire

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Bending Fatigue Strength		60.0 MPa Show Material materials with Bending Fatigue Strength of 60.0 MPa	O	EN 573-3, EN 1386, EN 485, EN 754, EN 755
Bending angle 180°		1.0 °/t Show Material materials with Bending angle 180° of 1.0 °/t	O	EN 573-3, EN 485
Bending angle 90°		0.5 °/t Show Material materials with Bending angle 90° of 0.5 °/t	O	EN 573-3, EN 485
		1.0 °/t Show Material materials with Bending angle 90° of 1.0 °/t	O	EN 573-3, EN 485
		1.5 °/t Show Material materials with Bending angle 90° of 1.5 °/t	O	EN 573-3, EN 485
		2.0 °/t Show Material materials with Bending angle 90° of 2.0 °/t	O	EN 573-3, EN 1386
		2.5 °/t Show Material materials with Bending angle 90° of 2.5 °/t	O	EN 573-3, EN 485
Elastic modulus		70.0 GPa Show Material materials with Elastic modulus of 70.0 GPa	O	EN 573-3, EN 1386, EN 485, EN 754, EN 755
	20.0 °C	68.0 - 73.0 GPa Show Material materials with Elastic modulus of 68.0 - 73.0 GPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493	Sheet, Strip, Wire
Elongation		6.0 % Show Material materials with Elongation of 6.0 %	O	EN 573-3, EN 1386		A50
		8.0 % Show Material materials with Elongation of 8.0 %	O	EN 573-3, EN 1386		A50
		10.0 % Show Material materials with Elongation of 10.0 %	O	EN 573-3, EN 1386		A50
		12.0 % Show Material materials with Elongation of 12.0 %	O	EN 573-3, EN 1386		A100
		12.0 % Show Material materials with Elongation of 12.0 %	O	EN 573-3, EN 1386, EN 755		A50
		13.0 % Show Material materials with Elongation of 13.0 %	O	EN 573-3, EN 754		A50
		14.0 % Show Material materials with Elongation of 14.0 %	O	EN 573-3, EN 755		A100
		14.0 % Show Material materials with Elongation of 14.0 %	O	EN 573-3, EN 485		A50
		15.0 % Show Material materials with Elongation of 15.0 %	O	EN 573-3, EN 754		A100
		16.0 % Show Material materials with Elongation of 16.0 %	O	EN 573-3, EN 485		A100
		16.0 % Show Material materials with Elongation of 16.0 %	O	EN 573-3, EN 485		A50
		17.0 % Show Material materials with Elongation of 17.0 %	O	EN 573-3, EN 485		A50
		18.0 % Show Material materials with Elongation of 18.0 %	O	EN 573-3, EN 485		A50
	20.0 °C	9.0 % Show Material materials with Elongation of 9.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493	Wire	A100
	20.0 °C	14.0 % Show Material materials with Elongation of 14.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493	Wire	A10
	20.0 °C	15.0 % Show Material materials with Elongation of 15.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493	Sheet, Strip	A10
	20.0 °C	18.0 % Show Material materials with Elongation of 18.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493	Sheet, Strip
Hardness, Brinell		40.0 [-] Show Material materials with Hardness, Brinell of 40.0 [-]	O	EN 573-3, EN 485
	20.0 °C	35.0 [-] Show Material materials with Hardness, Brinell of 35.0 [-]	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493	Sheet, Strip, Wire
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 6000 Series Aluminium
Poisson's ratio		0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-]				Typical for Wrought 6000 Series Aluminium
Shear modulus		26.4 GPa Show Material materials with Shear modulus of 26.4 GPa	O	EN 573-3, EN 1386, EN 485, EN 754, EN 755
	20.0 °C	26.0 - 27.0 GPa Show Material materials with Shear modulus of 26.0 - 27.0 GPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493	Sheet, Strip, Wire
Tensile strength		150.0 MPa Show Material materials with Tensile strength of 150.0 MPa	O	EN 573-3, EN 1386, EN 485
		155.0 MPa Show Material materials with Tensile strength of 155.0 MPa	O	EN 573-3, EN 485
		160.0 MPa Show Material materials with Tensile strength of 160.0 MPa	O	EN 573-3, EN 754, EN 755
	20.0 °C	110.0 MPa Show Material materials with Tensile strength of 110.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493	Wire
	20.0 °C	150.0 MPa Show Material materials with Tensile strength of 150.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493	Sheet, Strip

Thermal

Property	Temperature	Value	Condition	Related Standards	Shape
Coefficient of thermal expansion	20 °C	2.3399999999999996e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3399999999999996e-05 1/K	O	EN 573-3, EN 1386, EN 485, EN 754, EN 755
	100 °C	2.3399999999999996e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3399999999999996e-05 1/K	O	EN 573-3, EN 1386, EN 485, EN 754, EN 755
Melting point		585.0 - 650.0 °C Show Material materials with Melting point of 585.0 - 650.0 °C	O	EN 573-3, EN 1386, EN 485, EN 754, EN 755
Specific heat capacity		896.0 J/(kg·K) Show Material materials with Specific heat capacity of 896.0 J/(kg·K)	O	EN 573-3, EN 1386, EN 485, EN 754, EN 755
Thermal conductivity	20.0 °C	170.0 - 220.0 W/(m·K) Show Material materials with Thermal conductivity of 170.0 - 220.0 W/(m·K)	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493, EN 1386, EN 485, EN 754, EN 755	Sheet, Strip, Wire

Electrical

Property	Temperature	Value	Condition	Related Standards	Shape
Electrical conductivity	20.0 °C	24000000.0 - 32000000.0 S/m Show Material materials with Electrical conductivity of 24000000.0 - 32000000.0 S/m	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493, EN 1386, EN 485, EN 754, EN 755	Sheet, Strip, Wire
Electrical resistivity		3.13e-08 - 4.17e-08 Ω·m Show Material materials with Electrical resistivity of 3.13e-08 - 4.17e-08 Ω·m	O	EN 573-3, EN 1386, EN 485, EN 754, EN 755

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chromium	0.25 % Show Material materials with Chromium of 0.25 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493, EN 1386, EN 485, EN 754, EN 755	Sheet, Strip, Wire
Copper	0.1 % Show Material materials with Copper of 0.1 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493, EN 1386, EN 485, EN 754, EN 755	Sheet, Strip, Wire
Iron	0.5 % Show Material materials with Iron of 0.5 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493	Sheet, Strip, Wire
	0.50 % Show Material materials with Iron of 0.50 %	O	EN 573-3, EN 1386, EN 485, EN 754, EN 755
Magnesium	0.6 - 1.2 % Show Material materials with Magnesium of 0.6 - 1.2 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493, EN 1386, EN 485, EN 754, EN 755	Sheet, Strip, Wire
Manganese	0.4 - 1.0 % Show Material materials with Manganese of 0.4 - 1.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493, EN 1386, EN 485, EN 754, EN 755	Sheet, Strip, Wire
Silicon	0.7 - 1.3 % Show Material materials with Silicon of 0.7 - 1.3 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493, EN 1386, EN 485, EN 754, EN 755	Sheet, Strip, Wire
Titanium	0.1 % Show Material materials with Titanium of 0.1 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493, EN 1386, EN 485, EN 754, EN 755	Sheet, Strip, Wire
Zinc	0.2 % Show Material materials with Zinc of 0.2 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 240, VdTÜV WB 414, VdTÜV WB 327, VdTÜV WB 423, VdTÜV WB 493, EN 1386, EN 485, EN 754, EN 755	Sheet, Strip, Wire

Technological properties

Property
Anodizing	decorative: acceptable, Protective: very good
Brazing	hard brazing (with flux/ without flux): good / sufficient, friction soldering: good, soft brazing with flux: acceptable
Corrosion properties	Seawater: good, weathering: very good
Workability	Bending / Spinning (cold): acceptable (T3, T4) / good (O), Impact extrusion (cold): good (O), Deep drawing / upsetting (Condition) good (O) / good (O)

Looking for suppliers of this material? Click to see 10 supplier of EN 573-3 Grade 3.2315 O on Matmatch

EN 573-3 Grade 3.2315 O

Description

Related Standards

Equivalent Materials

Ashby charts

There are 7 other suppliers for this grade.

Preview all suppliers

Suggested reading

Properties