EN 573-3 Grade AW-3103A O

Want to keep this datasheet? Save it now in your required format

Description

Naturally hard AlMn alloy. The alloy is food safe.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,Aludium.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionRelated StandardsShape

Density

2.73 g/cm³

Show Material materials with Density of 2.73 g/cm³

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

Dimension

PropertyValueConditionRelated StandardsThicknessShape

Thickness

0.2 mm

Show Material materials with Thickness of 0.2 mm

O

EN 573-1, EN 573-2, EN 573-3

0.2 mm

Coil, Sheet

4.0 mm

Show Material materials with Thickness of 4.0 mm

O

EN 573-1, EN 573-2, EN 573-3

4.0 mm

Coil, Sheet

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Bending angle 180°

0 °/t

Show Material materials with Bending angle 180° of 0 °/t

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

Bending angle 90°

0 °/t

Show Material materials with Bending angle 90° of 0 °/t

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

Elastic modulus

70.0 GPa

Show Material materials with Elastic modulus of 70.0 GPa

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

Elongation

1 %

Show Material materials with Elongation of 1 %

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

A50

20.0 °C

18.0 %

Show Material materials with Elongation of 18.0 %

O

EN 573-3

Sheet

A50

20.0 °C

22.0 %

Show Material materials with Elongation of 22.0 %

O

EN 573-3

Tube

20.0 °C

23.0 %

Show Material materials with Elongation of 23.0 %

O

EN 573-3

Sheet

A50

Hardness, HBW

27 [-]

Show Material materials with Hardness, HBW of 27 [-]

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 3000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 3000 Series Aluminium

Shear modulus

26.5 GPa

Show Material materials with Shear modulus of 26.5 GPa

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

Tensile strength

90 MPa

Show Material materials with Tensile strength of 90 MPa

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

20.0 °C

90.0 MPa

Show Material materials with Tensile strength of 90.0 MPa

O

EN 573-3

Sheet

20.0 °C

95.0 MPa

Show Material materials with Tensile strength of 95.0 MPa

O

EN 573-3

Tube

20.0 °C

100.0 MPa

Show Material materials with Tensile strength of 100.0 MPa

O

EN 573-3

Sheet

Unlock all property charts

Yield strength

35 MPa

Show Material materials with Yield strength of 35 MPa

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

20.0 °C

35.0 MPa

Show Material materials with Yield strength of 35.0 MPa

O

EN 573-3

Tube, Sheet

RP02

Thermal

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coefficient of thermal expansion

100 °C

0.000023 1/K

Show Material materials with Coefficient of thermal expansion of 0.000023 1/K

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

20-100°C

Melting point

629.0 - 654.0 °C

Show Material materials with Melting point of 629.0 - 654.0 °C

Typical for Wrought 3000 Series Aluminium

Specific heat capacity

893.0 - 920.0 J/(kg·K)

Show Material materials with Specific heat capacity of 893.0 - 920.0 J/(kg·K)

Typical for Wrought 3000 Series Aluminium

Thermal conductivity

176 W/(m·K)

Show Material materials with Thermal conductivity of 176 W/(m·K)

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

Electrical

PropertyValueConditionRelated StandardsShapeComment

Electrical conductivity

23000000.0 - 29000000.0 S/m

Show Material materials with Electrical conductivity of 23000000.0 - 29000000.0 S/m

Typical for Wrought 3000 Series Aluminium

Electrical resistivity

4.3e-08 Ω·m

Show Material materials with Electrical resistivity of 4.3e-08 Ω·m

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

Chemical properties

PropertyValueConditionRelated StandardsShape

Chromium

0.1 %

Show Material materials with Chromium of 0.1 %

O

EN 573-3

Sheet, Tube

0.1 %

Show Material materials with Chromium of 0.1 %

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

Copper

0.1 %

Show Material materials with Copper of 0.1 %

O

EN 573-3

Sheet, Tube

0.1 %

Show Material materials with Copper of 0.1 %

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

Iron

0.7 %

Show Material materials with Iron of 0.7 %

O

EN 573-3

Sheet, Tube

0.7 %

Show Material materials with Iron of 0.7 %

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

Magnesium

0.3 %

Show Material materials with Magnesium of 0.3 %

O

EN 573-3

Sheet, Tube

0.3 %

Show Material materials with Magnesium of 0.3 %

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

Manganese

0.7 - 1.4 %

Show Material materials with Manganese of 0.7 - 1.4 %

O

EN 573-3, EN 573-1, EN 573-2, EN 573-3

Sheet, Tube, Coil, Sheet

Silicon

0.5 %

Show Material materials with Silicon of 0.5 %

O

EN 573-3

Sheet, Tube

0.5 %

Show Material materials with Silicon of 0.5 %

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

Titanium

0.1

Show Material materials with Titanium of 0.1

O

EN 573-3

Sheet, Tube

Zinc

0.2 %

Show Material materials with Zinc of 0.2 %

O

EN 573-3

Sheet, Tube

0.2 %

Show Material materials with Zinc of 0.2 %

O

EN 573-1, EN 573-2, EN 573-3

Coil, Sheet

Technological properties

Property
Anodizing

Very Good

Application areas

Facades: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Roofing: Single sheet, Sheets for composites/ sandwich Panels; Doors: Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Interiors and ceilings: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Furniture, Plinths, Blinds: Single sheet, Intermediate transformation/interior use; Anodizing Quality; Heat exchangers: Fins, Heat exchangers; Tubes: Flexible tube, Pipes; Cosmetics: Cosmetics pieces; Semi-rigid and corrugated: Smooth wall; Components: Automotive fins, Heat exchangers

Brazing

Excellent

Corrosion properties

Very Good

Welding

Very Good

Workability

Very Good