EN 573-3 Grade AW-5005A H19

Want to keep this datasheet? Save it now in your required format

Description

Naturally hard AlMg alloy. The alloy is food safe.

Related Standards

Equivalent Materials

Ashby charts

See where EN 573-3 Grade AW-5005A H19 falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

2.69 - 2.7 g/cm³ at 20 °C

Dimension

Dimensions

Dicke

Thermal

Coefficient of thermal expansion

α

2.18E-5 1/K at -50 °C

Hide chart

Max service temperature

Tmax

150 °C

Typical for Wrought 5000 Series Aluminium

Melting point

Tm

630 - 650 °C

Specific heat capacity

cp

879 - 899 J/(kg·K) at 20 °C

Thermal conductivity

λ

160 - 220 W/(m·K) at 20 °C

Electrical

Electrical conductivity

σel

2.30E+7 - 3.10E+7 S/m at 20 °C

Electrical resistivity

ρel

3.23E-8 - 4.35E-8 Ω·m at 20 °C

Chemical properties

Element

Weight %

Comment

Other

-

each 0.05, total 0.15, Rest Al

Mg

0.7 - 1.1 %

Fe

0.45 %

Si

0.3 %

Zn

0.2 %

More

Technological properties

Anodizing

decorative: gut (EQ: sehr gut), Protective: very good

Brazing

hard brazing (with flux/ without flux): sufficient - poor / sufficient, friction soldering: good, soft brazing with flux: acceptable

Corrosion properties

Seawater: good, weathering: very good

Workability

Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) good (O) / good (H12)

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.