EN 573-3 Grade AW-2014 T4

Want to keep this datasheet? Save it now in your required format

Description

Age-hardenable AlCu alloy. The alloy is not food safe.

Related Standards

Equivalent Materials

Ashby charts

See where EN 573-3 Grade AW-2014 T4 falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

2.8 g/cm³ at 20 °C

Dimension

Dimensions

Dicke

Mechanical

Plane-Strain Fracture Toughnes

KIC

Typical for Wrought 2000 Series Aluminium

Poisson's ratio

ν

Typical for Wrought 2000 Series Aluminium

Tensile strength, transverse

Rm,trans

Yield strength Rp0.2, transverse

Rp0.2,trans

Thermal

Coefficient of thermal expansion

α

2.1E-5 1/K at -50 °C

Hide chart

Melting point

Tm

505 - 640 °C

Specific heat capacity

cp

816 - 963 J/(kg·K) at 20 °C

Typical for Wrought 2000 Series Aluminium

Thermal conductivity

λ

134 - 200 W/(m·K) at 20 °C

Electrical

Electrical conductivity

σel

1.70E+7 - 2.90E+7 S/m at 20 °C

Electrical resistivity

ρel

3.45E-8 - 5E-8 Ω·m at 20 °C

Chemical properties

Element

Weight %

Comment

Other

-

Cr + Ti < 0.20 for extruded products, if agreed., each 0.05, total 0.15, Rest Al

Cu

3.9 - 5 %

Fe

0.5 - 0.7 %

Si

0.5 - 1.2 %

Mn

0.4 - 1.2 %

More

Technological properties

Anodizing

decorative: not suitable, Protective: acceptable

Brazing

hard brazing (with flux/ without flux): not suitable / not suitable, friction soldering: acceptable, soft brazing with flux: not suitable

Corrosion properties

Seawater: sufficient, weathering: acceptable

Workability

Bending / Spinning (cold): gut (O) / ungeeignet, Impact extrusion (cold): not suitable, Deep drawing / upsetting (Condition) acceptable (O) / not suitable

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.