EN 573-3 Grade AW-5026 H111

Want to keep this datasheet? Save it now in your required format

Description

Naturally hard AlMg alloy. The alloy is food safe.

Related Standards

Equivalent Materials

Ashby charts

See where EN 573-3 Grade AW-5026 H111 falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

2.69 g/cm³ at 20 °C

Dimension

Dimensions

Dicke

Mechanical

Elastic modulus

E

Typical for Wrought 5000 Series Aluminium

Plane-Strain Fracture Toughnes

KIC

Typical for Wrought 5000 Series Aluminium

Poisson's ratio

ν

Typical for Wrought 5000 Series Aluminium

Shear modulus

G

Typical for Wrought 5000 Series Aluminium

Tensile strength, transverse

Rm,trans

Yield strength Rp0.2, transverse

Rp0.2,trans

Thermal

Coefficient of thermal expansion

α

2.2E-5 - 2.5E-5 1/K at 20 °C

Typical for Wrought 5000 Series Aluminium

Max service temperature

Tmax

150 °C

Typical for Wrought 5000 Series Aluminium

Melting point

Tm

600 - 650 °C

Typical for Wrought 5000 Series Aluminium

Specific heat capacity

cp

879 - 963 J/(kg·K) at 20 °C

Typical for Wrought 5000 Series Aluminium

Thermal conductivity

λ

112 - 205 W/(m·K) at 20 °C

Typical for Wrought 5000 Series Aluminium

Electrical

Electrical conductivity

σel

1.80E+7 - 3.10E+7 S/m at 20 °C

Typical for Wrought 5000 Series Aluminium

Electrical resistivity

ρel

3.3E-8 - 5E-8 Ω·m at 20 °C

Typical for Wrought 5000 Series Aluminium

Chemical properties

Element

Weight %

Comment

Other

-

each 0.05, total 0.15, Rest Al

Mg

3.9 - 4.9 %

Zn

1 %

Mn

0.6 - 1.8 %

Si

0.55 - 1.4 %

More

Technological properties

Workability

Good workability.

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.