EN 573-3 Grade 3.1655 O3

View suppliers (6)
Want to keep this datasheet? Save it now in your required format

Description

Aluminum DIN 3.1655 is a popular age-hardenable alloy known for its free-machining characteristics and mechanical properties. It can be machined to very close tolerances while still maintaining a smooth and bright finish. Unlike other aluminum alloys, DIN 3.1655 does not offer good corrosion resistance or weldability.

Related Standards

Equivalent Materials

This material data has been provided by AluKey.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionRelated Standards

Density

2.82 g/cm³

Show Material materials with Density of 2.82 g/cm³

O3

EN 573-3, EN 1715-3

2.83 g/cm³

Show Material materials with Density of 2.83 g/cm³

O3

EN 573-3, EN 1715-3

Mechanical

PropertyValueConditionRelated StandardsComment

Elastic modulus

70.0 GPa

Show Material materials with Elastic modulus of 70.0 GPa

O3

EN 573-3, EN 1715-3

72.5 GPa

Show Material materials with Elastic modulus of 72.5 GPa

O3

EN 573-3, EN 1715-3

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 2000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 2000 Series Aluminium

Shear modulus

27.3 GPa

Show Material materials with Shear modulus of 27.3 GPa

O3

EN 573-3, EN 1715-3

Tensile strength

110.0 - 170.0 MPa

Show Material materials with Tensile strength of 110.0 - 170.0 MPa

O3

EN 573-3, EN 1715-3

Thermal

PropertyTemperatureValueConditionRelated Standards

Coefficient of thermal expansion

-50 °C

2.14e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.14e-05 1/K

O3

EN 573-3, EN 1715-3

20 °C

2.14e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.14e-05 1/K

O3

EN 573-3, EN 1715-3

20 °C

2.2899999999999998e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.2899999999999998e-05 1/K

O3

EN 573-3, EN 1715-3

20 °C

2.3399999999999996e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.3399999999999996e-05 1/K

O3

EN 573-3, EN 1715-3

20 °C

2.4e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.4e-05 1/K

O3

EN 573-3, EN 1715-3

20 °C

2.4999999999999998e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.4999999999999998e-05 1/K

O3

EN 573-3, EN 1715-3

100 °C

2.2899999999999998e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.2899999999999998e-05 1/K

O3

EN 573-3, EN 1715-3

100 °C

2.3399999999999996e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.3399999999999996e-05 1/K

O3

EN 573-3, EN 1715-3

200 °C

2.4e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.4e-05 1/K

O3

EN 573-3, EN 1715-3

300 °C

2.4999999999999998e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.4999999999999998e-05 1/K

O3

EN 573-3, EN 1715-3

Melting point

540.0 - 645.0 °C

Show Material materials with Melting point of 540.0 - 645.0 °C

O3

EN 573-3, EN 1715-3

585.0 - 650.0 °C

Show Material materials with Melting point of 585.0 - 650.0 °C

O3

EN 573-3, EN 1715-3

Specific heat capacity

864.0 J/(kg·K)

Show Material materials with Specific heat capacity of 864.0 J/(kg·K)

O3

EN 573-3, EN 1715-3

Thermal conductivity

151.0 - 172.0 W/(m·K)

Show Material materials with Thermal conductivity of 151.0 - 172.0 W/(m·K)

O3

EN 573-3, EN 1715-3

170.0 - 220.0 W/(m·K)

Show Material materials with Thermal conductivity of 170.0 - 220.0 W/(m·K)

O3

EN 573-3, EN 1715-3

Electrical

PropertyValueConditionRelated Standards

Electrical conductivity

23000000.0 - 26000000.0 S/m

Show Material materials with Electrical conductivity of 23000000.0 - 26000000.0 S/m

O3

EN 573-3, EN 1715-3

24000000.0 - 32000000.0 S/m

Show Material materials with Electrical conductivity of 24000000.0 - 32000000.0 S/m

O3

EN 573-3, EN 1715-3

Electrical resistivity

3.13e-08 - 4.17e-08 Ω·m

Show Material materials with Electrical resistivity of 3.13e-08 - 4.17e-08 Ω·m

O3

EN 573-3, EN 1715-3

3.85e-08 - 4.35e-08 Ω·m

Show Material materials with Electrical resistivity of 3.85e-08 - 4.35e-08 Ω·m

O3

EN 573-3, EN 1715-3

Chemical properties

PropertyValueConditionRelated Standards

Bismuth

0.2 - 0.8 %

Show Material materials with Bismuth of 0.2 - 0.8 %

O3

EN 573-3, EN 1715-3

Copper

5.0 - 6.0 %

Show Material materials with Copper of 5.0 - 6.0 %

O3

EN 573-3, EN 1715-3

Iron

0.70 %

Show Material materials with Iron of 0.70 %

O3

EN 573-3, EN 1715-3

Lead

0.2 - 0.6 %

Show Material materials with Lead of 0.2 - 0.6 %

O3

EN 573-3, EN 1715-3

Silicon

0.4 %

Show Material materials with Silicon of 0.4 %

O3

EN 573-3, EN 1715-3

Zinc

0.3 %

Show Material materials with Zinc of 0.3 %

O3

EN 573-3, EN 1715-3

Technological properties

Property
Anodizing

decorative: not suitable, Protective: poor

Brazing

hard brazing (with flux/ without flux): not suitable /, friction soldering: sufficient

Corrosion properties

Seawater: poor, weathering: sufficient

Workability

Deep drawing / upsetting (Condition) - / acceptable