Properties
General
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Density | 2.8 g/cm³ Show Material materials with Density of 2.8 g/cm³ | T451 | EN 573-3, EN 485, EN 754 |
Mechanical
| Property | Value | Condition | Related Standards | Comment |
|---|---|---|---|---|
Bending angle 180° | 3.0 °/t Show Material materials with Bending angle 180° of 3.0 °/t | T451 | EN 573-3, EN 485 | |
5.0 °/t Show Material materials with Bending angle 180° of 5.0 °/t | T451 | EN 573-3, EN 485 | ||
Bending angle 90° | 3.0 °/t Show Material materials with Bending angle 90° of 3.0 °/t | T451 | EN 573-3, EN 485 | |
5.0 °/t Show Material materials with Bending angle 90° of 5.0 °/t | T451 | EN 573-3, EN 485 | ||
8.0 °/t Show Material materials with Bending angle 90° of 8.0 °/t | T451 | EN 573-3, EN 485 | ||
Elastic modulus | 73.0 GPa Show Material materials with Elastic modulus of 73.0 GPa | T451 | EN 573-3, EN 485, EN 754 | |
Hardness, Brinell | 110.0 [-] Show Material materials with Hardness, Brinell of 110.0 [-] | T451 | EN 573-3, EN 485 | |
111.0 [-] Show Material materials with Hardness, Brinell of 111.0 [-] | T451 | EN 573-3, EN 485 | ||
112.0 [-] Show Material materials with Hardness, Brinell of 112.0 [-] | T451 | EN 573-3, EN 485 | ||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m | Typical for Wrought 2000 Series Aluminium | ||
Poisson's ratio | 0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] | Typical for Wrought 2000 Series Aluminium | ||
Shear modulus | 27.4 GPa Show Material materials with Shear modulus of 27.4 GPa | T451 | EN 573-3, EN 485, EN 754 | |
Tensile strength | 380.0 MPa Show Material materials with Tensile strength of 380.0 MPa | T451 | EN 573-3, EN 754 | |
395.0 MPa Show Material materials with Tensile strength of 395.0 MPa | T451 | EN 573-3, EN 485 | ||
400.0 MPa Show Material materials with Tensile strength of 400.0 MPa | T451 | EN 573-3, EN 485 |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Comment |
|---|---|---|---|---|---|
Coefficient of thermal expansion | -50 °C | 2.1e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.1e-05 1/K | T451 | EN 573-3, EN 485, EN 754 | |
20 °C | 2.1e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.1e-05 1/K | T451 | EN 573-3, EN 485, EN 754 | ||
20 °C | 2.28e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.28e-05 1/K | T451 | EN 573-3, EN 485, EN 754 | ||
20 °C | 2.3e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3e-05 1/K | T451 | EN 573-3, EN 485, EN 754 | ||
20 °C | 2.36e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.36e-05 1/K | T451 | EN 573-3, EN 485, EN 754 | ||
20 °C | 2.46e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.46e-05 1/K | T451 | EN 573-3, EN 485, EN 754 | ||
100 °C | 2.28e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.28e-05 1/K | T451 | EN 573-3, EN 485, EN 754 | ||
100 °C | 2.3e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3e-05 1/K | T451 | EN 573-3, EN 485, EN 754 | ||
200 °C | 2.36e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.36e-05 1/K | T451 | EN 573-3, EN 485, EN 754 | ||
300 °C | 2.46e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.46e-05 1/K | T451 | EN 573-3, EN 485, EN 754 | ||
Melting point | 505.0 - 635.0 °C Show Material materials with Melting point of 505.0 - 635.0 °C | T451 | EN 573-3, EN 485, EN 754 | ||
510.0 - 640.0 °C Show Material materials with Melting point of 510.0 - 640.0 °C | T451 | EN 573-3, EN 485, EN 754 | |||
Specific heat capacity | 816.0 - 963.0 J/(kg·K) Show Material materials with Specific heat capacity of 816.0 - 963.0 J/(kg·K) | Typical for Wrought 2000 Series Aluminium | |||
Thermal conductivity | 134.0 - 193.0 W/(m·K) Show Material materials with Thermal conductivity of 134.0 - 193.0 W/(m·K) | T451 | EN 573-3, EN 485, EN 754 | ||
140.0 - 200.0 W/(m·K) Show Material materials with Thermal conductivity of 140.0 - 200.0 W/(m·K) | T451 | EN 573-3, EN 485, EN 754 |
Electrical
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Electrical conductivity | 20000000.0 - 29000000.0 S/m Show Material materials with Electrical conductivity of 20000000.0 - 29000000.0 S/m | T451 | EN 573-3, EN 485, EN 754 |
21000000.0 - 24000000.0 S/m Show Material materials with Electrical conductivity of 21000000.0 - 24000000.0 S/m | T451 | EN 573-3, EN 485, EN 754 | |
Electrical resistivity | 3.45e-08 - 5e-08 Ω·m Show Material materials with Electrical resistivity of 3.45e-08 - 5e-08 Ω·m | T451 | EN 573-3, EN 485, EN 754 |
4.17e-08 - 4.76e-08 Ω·m Show Material materials with Electrical resistivity of 4.17e-08 - 4.76e-08 Ω·m | T451 | EN 573-3, EN 485, EN 754 |
Chemical properties
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Chromium | 0.1 % Show Material materials with Chromium of 0.1 % | T451 | EN 573-3, EN 485, EN 754 |
Copper | 3.9 - 5.0 % Show Material materials with Copper of 3.9 - 5.0 % | T451 | EN 573-3, EN 485, EN 754 |
Iron | 0.70 % Show Material materials with Iron of 0.70 % | T451 | EN 573-3, EN 485, EN 754 |
Magnesium | 0.2 - 0.8 % Show Material materials with Magnesium of 0.2 - 0.8 % | T451 | EN 573-3, EN 485, EN 754 |
Manganese | 0.4 - 1.2 % Show Material materials with Manganese of 0.4 - 1.2 % | T451 | EN 573-3, EN 485, EN 754 |
Silicon | 0.5 - 1.2 % Show Material materials with Silicon of 0.5 - 1.2 % | T451 | EN 573-3, EN 485, EN 754 |
Titanium | 0.15 % Show Material materials with Titanium of 0.15 % | T451 | EN 573-3, EN 485, EN 754 |
Zinc | 0.25 % Show Material materials with Zinc of 0.25 % | T451 | EN 573-3, EN 485, EN 754 |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: not suitable, Protective: acceptable | |
| Brazing | hard brazing (with flux/ without flux): not suitable / not suitable, friction soldering: acceptable, soft brazing with flux: not suitable | |
| Corrosion properties | Seawater: sufficient, weathering: acceptable | |
| Workability | Bending / Spinning (cold): gut (O) / ungeeignet, Impact extrusion (cold): not suitable, Deep drawing / upsetting (Condition) acceptable (O) / not suitable | |