Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 23.0 °C | 2.79 - 3 g/cm³ Show Material materials with Density of 2.79 - 3 g/cm³ |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 23.0 °C | 73 GPa Show Material materials with Elastic modulus of 73 GPa | |
Elongation | 23.0 °C | 12 % Show Material materials with Elongation of 12 % | |
Elongation A100 | 23.0 °C | 10 % Show Material materials with Elongation A100 of 10 % | |
Elongation A50 | 23.0 °C | 12 % Show Material materials with Elongation A50 of 12 % | |
Plane-Strain Fracture Toughnes | 23.0 °C | 22 - 35 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m | Typical for Wrought 2000 Series Aluminium |
Poisson's ratio | 23.0 °C | 0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] | Typical for Wrought 2000 Series Aluminium |
Shear modulus | 23.0 °C | 26 - 27.5 GPa Show Material materials with Shear modulus of 26 - 27.5 GPa | Typical for Wrought 2000 Series Aluminium |
Tensile strength | 23.0 °C | 380 - 410 MPa Show Material materials with Tensile strength of 380 - 410 MPa | |
Yield strength | 23.0 °C | 240 MPa Show Material materials with Yield strength of 240 MPa | |
Yield strength Rp0.2 | 23.0 °C | 220 MPa Show Material materials with Yield strength Rp0.2 of 220 MPa |
Thermal
| Property | Temperature | Value |
|---|---|---|
Coefficient of thermal expansion | 20.0 °C | 2.36E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.36E-5 1/K |
23.0 °C | 2.4E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.4E-5 1/K | |
100.0 °C | 2.36E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.36E-5 1/K | |
Melting point | 510 - 640 °C Show Material materials with Melting point of 510 - 640 °C | |
Specific heat capacity | 23.0 °C | 870 J/(kg·K) Show Material materials with Specific heat capacity of 870 J/(kg·K) |
Thermal conductivity | 23.0 °C | 134 - 193 W/(m·K) Show Material materials with Thermal conductivity of 134 - 193 W/(m·K) |
Electrical
| Property | Temperature | Value |
|---|---|---|
Electrical conductivity | 23.0 °C | 2.00E+7 - 2.90E+7 S/m Show Material materials with Electrical conductivity of 2.00E+7 - 2.90E+7 S/m |
Electrical resistivity | 23.0 °C | 3.45E-8 - 5E-8 Ω·m Show Material materials with Electrical resistivity of 3.45E-8 - 5E-8 Ω·m |
Chemical properties
| Property | Value | Comment |
|---|---|---|
Aluminium | 91.6 - 95.5 % Show Material materials with Aluminium of 91.6 - 95.5 % | |
Chromium | 0 - 0.1 % Show Material materials with Chromium of 0 - 0.1 % | |
Copper | 3.5 - 4.5 % Show Material materials with Copper of 3.5 - 4.5 % | |
Iron | 0 - 0.7 % Show Material materials with Iron of 0 - 0.7 % | |
Magnesium | 0.4 - 0.8 % Show Material materials with Magnesium of 0.4 - 0.8 % | |
Manganese | 0.4 - 1 % Show Material materials with Manganese of 0.4 - 1 % | |
Other | 0 - 0.15 % Show Material materials with Other of 0 - 0.15 % | each 0.05, total 0.15, Rest Al |
Silicon | 0.2 - 0.8 % Show Material materials with Silicon of 0.2 - 0.8 % | |
Titanium | 0 - 0.15 % Show Material materials with Titanium of 0 - 0.15 % | |
Zinc | 0 - 0.25 % Show Material materials with Zinc of 0 - 0.25 % |
Technological properties
| Property | ||
|---|---|---|
| Brazing | general: no brazing is known or developed | |
| Corrosion properties | Stress corrosion cracking: Operational damage in areas with tensile stresses transverse to the grain structure, limited damage to laboratory samples, general: sufficient, in principle it should be protected | |
| General machinability | General: good to acceptable | |
| Workability | general (condition): poor(T4, T451) | |