RADILON A HS 164 NT

Alternative and trade names
PA66
Want to keep this datasheet? Save it now in your required format

Description

PA66 injection moulding grade. Internally lubricated. Fast cycling. Natural colour.

General purpose grade, suitable for parts requiring high productivity like fasteners, connectors, cable ties.

This material data has been provided by Radici Group.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionTesting StandardThickness

Density

1.14 g/cm³

Show Supplier Material materials with Density of 1.14 g/cm³

dry

ISO 1183

Moisture absorption

2.1 %

Show Supplier Material materials with Moisture absorption of 2.1 %

50% RH

ISO 62

2 mm

Water absorption

8.9 %

Show Supplier Material materials with Water absorption of 8.9 %

ISO 62

2 mm

Mechanical

PropertyTemperatureValueConditionTesting StandardComment

Elastic modulus

1 GPa

Show Supplier Material materials with Elastic modulus of 1 GPa

50%RH

ISO 527-2/1A

1mm/min

3 GPa

Show Supplier Material materials with Elastic modulus of 3 GPa

dry

ISO 527-2/1A

1mm/min

Elongation

30 %

Show Supplier Material materials with Elongation of 30 %

dry

ISO 527-2/1A

50mm/min

50 %

Show Supplier Material materials with Elongation of 50 %

50%RH

ISO 527-2/1A

min. C50mm/min

Elongation at yield

5 %

Show Supplier Material materials with Elongation at yield of 5 %

dry

ISO 527-2/1A

30 %

Show Supplier Material materials with Elongation at yield of 30 %

50%RH

ISO 527-2/1A

Flexural modulus

3 GPa

Show Supplier Material materials with Flexural modulus of 3 GPa

dry

ISO 178

2mm/min

Flexural strength

110 MPa

Show Supplier Material materials with Flexural strength of 110 MPa

dry

ISO 178

2mm/min

Impact strength, Charpy notched

-30 °C

4 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 4 kJ/m²

dry

ISO 179/1eA

23 °C

5 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 5 kJ/m²

dry

ISO 179/1eA

23 °C

15 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 15 kJ/m²

50%RH

ISO 179/1eA

Impact strength, Charpy unnotched

No Break at 23°C

ISO 179/1eU

Yield strength

50 MPa

Show Supplier Material materials with Yield strength of 50 MPa

50%RH

ISO 527-2/1A

50mm/min

80 MPa

Show Supplier Material materials with Yield strength of 80 MPa

dry

ISO 527-2/1A

50mm/min

Thermal

PropertyValueTesting StandardThicknessPressureComment

Coefficient of thermal expansion

9.4e-05

Show Supplier Material materials with Coefficient of thermal expansion of 9.4e-05

ISO 11359-1/-2

23°C-55°C, Transverse

9.5e-05 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 9.5e-05 1/K

ISO 11359-1/-2

23°C-55°C

Glow Wire Flammability Index

750 °C

Show Supplier Material materials with Glow Wire Flammability Index of 750 °C

IEC 60695-2-12

1 mm

800 °C

Show Supplier Material materials with Glow Wire Flammability Index of 800 °C

IEC 60695-2-12

2 mm

Heat deflection temperature

70 °C

Show Supplier Material materials with Heat deflection temperature of 70 °C

ISO 75/2Af

2 MPa

200 °C

Show Supplier Material materials with Heat deflection temperature of 200 °C

ISO 75/2Bf

0.45 MPa

Melting point

260 °C

Show Supplier Material materials with Melting point of 260 °C

ISO 11357-1/-3

10°C/min

Vicat softening temperature

240 °C

Show Supplier Material materials with Vicat softening temperature of 240 °C

ISO 306

50°C/h 50N

Flammability

Automotive Interior Flammability(mm/min): 0 ,method: ISO 3795 and thickness tested (mm): 3 | Class: V-2 ,method: UL 94, and thickness tested (mm): 0.8

Electrical

PropertyValueConditionTesting StandardComment

Comparative tracking index

600 V

Show Supplier Material materials with Comparative tracking index of 600 V

dry

IEC 60112

Sol.A

Surface resistivity

1e+10 Ω/sq

Show Supplier Material materials with Surface resistivity of 1e+10 Ω/sq

50%RH

IEC 60093

500V

1e+12 Ω/sq

Show Supplier Material materials with Surface resistivity of 1e+12 Ω/sq

dry

IEC 60093

500V

Volume resistivity

1e+12 Ω·cm

Show Supplier Material materials with Volume resistivity of 1e+12 Ω·cm

50%RH

IEC 60093

500V

1e+14 Ω·cm

Show Supplier Material materials with Volume resistivity of 1e+14 Ω·cm

dry

IEC 60093

500V

Rheological Properties

PropertyValueConditionTesting StandardComment

Shrinkage

1.2 %

Show Supplier Material materials with Shrinkage of 1.2 %

dry

ISO 294-4

1.3 %

Show Supplier Material materials with Shrinkage of 1.3 %

dry

ISO 294-4

Transverse

Technological properties

Property
Certifications

RoHS 2011/65/UE

Color

Natural

Processing methods

Injection Molding