ALLOW™ Billets Alloy Series 6063

Want to keep this datasheet? Save it now in your required format

Description

Low Carbon Billets ALLOW™ produced with renewable hydropower by RUSAL.

Related Standards

Equivalent Materials

This material data has been provided by Rusal.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyValue

Carbon Footprint

Scope 1&2 (direct and indirect smelter emissions) - less than 4 T CO₂ eq/ T Al, average 2,6 T CO₂ eq / T Al. Total carbon footprint from cradle to gate is less than 8 T CO₂ eq / T Al.

Dimension

PropertyValue

Length

400 - 7000 mm

Show Supplier Material materials with Length of 400 - 7000 mm

Dimensions

Diameter = 152 mm (6”), 178 mm (7”), 203 mm (8”), 228 mm (9”), 254 mm (10”), 279 mm (11”), 306 mm (12”), 356 mm (14”), 406 mm (16”), 457 mm (18”).

Mechanical

PropertyTemperatureValue

Tensile strength

23.0 °C

200 - 265 MPa

Show Supplier Material materials with Tensile strength of 200 - 265 MPa

Thermal

PropertyValueComment

Melting point

615 - 659 °C

Show Supplier Material materials with Melting point of 615 - 659 °C

Solidus (615-624°C); Liquidus (655-659°C)

Chemical properties

PropertyValueComment

Aluminium

Balance

Chromium

0.1 %

Show Supplier Material materials with Chromium of 0.1 %

according to EN 573-3

Copper

0.1 %

Show Supplier Material materials with Copper of 0.1 %

according to EN 573-3

Iron

0.35 %

Show Supplier Material materials with Iron of 0.35 %

according to EN 573-3

Magnesium

0.45 - 0.9 %

Show Supplier Material materials with Magnesium of 0.45 - 0.9 %

according to EN 573-3

Manganese

0.1 %

Show Supplier Material materials with Manganese of 0.1 %

according to EN 573-3

Other

0.15 %

Show Supplier Material materials with Other of 0.15 %

according to EN 573-3

Silicon

0.2 - 0.6 %

Show Supplier Material materials with Silicon of 0.2 - 0.6 %

according to EN 573-3

Titanium

0.1 %

Show Supplier Material materials with Titanium of 0.1 %

according to EN 573-3

Zinc

0.1 %

Show Supplier Material materials with Zinc of 0.1 %

according to EN 573-3

Technological properties

Property
Application areas

Extrusion Applications

Processing history

Smelters: Sayanogorsk Aluminium Smelter (SAZ), Krasnoyarsk Aluminium Smelter (KRAZ), Kubikenborg Aluminium AB (KUBAL)