EN 573-3 Grade AW-2017A O

View suppliers (12)
Want to keep this datasheet? Save it now in your required format

Description

The material EN AW-Al Cu4mgSi(A) is produced for sheet, strip and plates, for extruded and drawn components as well as for wire and prewire for mechanical application. It is used for forged parts and prematerial. The alloy is not food-safe. To the comparable mark AlCuMg1, material No. 3.1325, acc. to DIN 1725-1 applies: The alloy pertains to the alloy-type (AlCuMg-Typ) used as the first of the aluminium- forgeable materials in technics. Alloys of this type are usable for natural and artificial aging. They achieve high mechanical strength and they are relatively heat-resistant even in a soft condition. In age hardened condition the material achieves strength above 400 N/mm². Heat-treatment for hardening: Solution annealing: 495° to 505°C, quenching in water Natural aging: 5 to 8 d at RT Artificial aging:16 to 24 h at 180 to 195°C Artificial aging is impossible in practice due to the decreasing corrosion resistance in artificially aged material condition. Even in a naturally aged condition is a surface protection necessary. Considerable strength decrease as well as complicate weldability and hot workability of this alloy as a result of insignificant heat-treatment failures are very unfavorable. Additionally, by welding is caused an economically unacceptable strength loss in the weld seam sector. The application of this material in welding constructions is for economical reasons impossible. It has a very favorable machinability what justifies the application of screws and rivets as connecting elements. The alloy AlCuMg1 is particularly well suitable for construction parts of a higher static load. Application: in machine engineering (incl. mold making) for machine benches, hydraulic turned parts, for tools, appliances (anchor plates, head and punch unit holder plates as well as guide plate). As connecting elements (screws, solid rivets), in vehicle engineering as bumper, axle bearing cases, as body and safety parts and in transport for air freight container as well as in aircraft construction.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueConditionRelated StandardsShape

Density

2.8 g/cm³

Show Material materials with Density of 2.8 g/cm³

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Strip, Sheet, Plate, Tube, Bar

20.0 °C

2.8 g/cm³

Show Material materials with Density of 2.8 g/cm³

O

EN 573-3

Rod, Flat, Tube

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Bending Fatigue Strength

90.0 MPa

Show Material materials with Bending Fatigue Strength of 90.0 MPa

O

EN 573-3, EN 485, EN 754, EN 755

Strip, Sheet, Plate, Tube, Bar

Bending angle 180°

0.5 °/t

Show Material materials with Bending angle 180° of 0.5 °/t

O

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Bar

1.0 °/t

Show Material materials with Bending angle 180° of 1.0 °/t

O

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Bar

Bending angle 90°

1.0 °/t

Show Material materials with Bending angle 90° of 1.0 °/t

O

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Bar

1.5 °/t

Show Material materials with Bending angle 90° of 1.5 °/t

O

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Bar

2.5 °/t

Show Material materials with Bending angle 90° of 2.5 °/t

O

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Bar

4.0 °/t

Show Material materials with Bending angle 90° of 4.0 °/t

O

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Bar

Elastic modulus

72.5 GPa

Show Material materials with Elastic modulus of 72.5 GPa

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Strip, Sheet, Plate, Tube, Bar

20.0 °C

65.0 - 73.5 GPa

Show Material materials with Elastic modulus of 65.0 - 73.5 GPa

O

EN 573-3

Rod, Flat, Tube

Elongation

10.0 %

Show Material materials with Elongation of 10.0 %

O

EN 573-3, EN 754, EN 755

Strip, Sheet, Plate, Tube, Bar

A50

12.0 %

Show Material materials with Elongation of 12.0 %

O

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Bar

A50

12.0 %

Show Material materials with Elongation of 12.0 %

O

EN 573-3, EN 485, EN 754, EN 755

Strip, Sheet, Plate, Tube, Bar

A100

13.0 %

Show Material materials with Elongation of 13.0 %

O

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Bar

A50

14.0 %

Show Material materials with Elongation of 14.0 %

O

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Bar

A50

20.0 °C

10.0 %

Show Material materials with Elongation of 10.0 %

O

EN 573-3

Rod, Tube

A50

20.0 °C

12.0 %

Show Material materials with Elongation of 12.0 %

O

EN 573-3

Flat

A50

20.0 °C

12.0 %

Show Material materials with Elongation of 12.0 %

O

EN 573-3

Flat, Rod, Tube

20.0 °C

12.0 %

Show Material materials with Elongation of 12.0 %

O

EN 573-3

Flat

A50 Transverse

20.0 °C

12.0 %

Show Material materials with Elongation of 12.0 %

O

EN 573-3

Flat

Transverse

20.0 °C

13.0 %

Show Material materials with Elongation of 13.0 %

O

EN 573-3

Flat

A50

20.0 °C

13.0 %

Show Material materials with Elongation of 13.0 %

O

EN 573-3

Flat

A50 Transverse

20.0 °C

14.0 %

Show Material materials with Elongation of 14.0 %

O

EN 573-3

Flat

A50

20.0 °C

14.0 %

Show Material materials with Elongation of 14.0 %

O

EN 573-3

Flat

A50 Transverse

Hardness, Brinell

55.0 [-]

Show Material materials with Hardness, Brinell of 55.0 [-]

O

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Bar

20.0 °C

45.0 [-]

Show Material materials with Hardness, Brinell of 45.0 [-]

O

EN 573-3

Rod, Tube

20.0 °C

55.0 [-]

Show Material materials with Hardness, Brinell of 55.0 [-]

O

EN 573-3

Flat

20.0 °C

55.0 [-]

Show Material materials with Hardness, Brinell of 55.0 [-]

O

EN 573-3

Flat

Transverse

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 2000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 2000 Series Aluminium

Shear modulus

27.2 GPa

Show Material materials with Shear modulus of 27.2 GPa

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Strip, Sheet, Plate, Tube, Bar

20.0 °C

26.0 - 28.5 GPa

Show Material materials with Shear modulus of 26.0 - 28.5 GPa

O

EN 573-3

Rod, Flat, Tube

Tensile strength

150.0 - 220.0 MPa

Show Material materials with Tensile strength of 150.0 - 220.0 MPa

O

EN 573-3, EN 1715-3

Strip, Sheet, Plate, Tube, Bar

225.0 MPa

Show Material materials with Tensile strength of 225.0 MPa

O

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Bar

240.0 MPa

Show Material materials with Tensile strength of 240.0 MPa

O

EN 573-3, EN 754

Strip, Sheet, Plate, Tube, Bar

250.0 MPa

Show Material materials with Tensile strength of 250.0 MPa

O

EN 573-3, EN 755

Strip, Sheet, Plate, Tube, Bar

20.0 °C

225.0 MPa

Show Material materials with Tensile strength of 225.0 MPa

O

EN 573-3

Flat

20.0 °C

225.0 MPa

Show Material materials with Tensile strength of 225.0 MPa

O

EN 573-3

Flat

Transverse

20.0 °C

240.0 MPa

Show Material materials with Tensile strength of 240.0 MPa

O

EN 573-3

Rod, Tube

20.0 °C

250.0 MPa

Show Material materials with Tensile strength of 250.0 MPa

O

EN 573-3

Rod, Tube

20.0 °C

436.0 MPa

Show Material materials with Tensile strength of 436.0 MPa

O

EN 573-3

100.0 °C

394.0 MPa

Show Material materials with Tensile strength of 394.0 MPa

O

EN 573-3

150.0 °C

281.0 MPa

Show Material materials with Tensile strength of 281.0 MPa

O

EN 573-3

200.0 °C

155.0 MPa

Show Material materials with Tensile strength of 155.0 MPa

O

EN 573-3

250.0 °C

84.0 MPa

Show Material materials with Tensile strength of 84.0 MPa

O

EN 573-3

300.0 °C

46.0 MPa

Show Material materials with Tensile strength of 46.0 MPa

O

EN 573-3

370.0 °C

32.0 MPa

Show Material materials with Tensile strength of 32.0 MPa

O

EN 573-3

Thermal

PropertyTemperatureValueConditionRelated StandardsShape

Coefficient of thermal expansion

20 °C

2.3e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.3e-05 1/K

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Strip, Sheet, Plate, Tube, Bar

100 °C

2.3e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.3e-05 1/K

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Strip, Sheet, Plate, Tube, Bar

Melting point

512.0 - 650.0 °C

Show Material materials with Melting point of 512.0 - 650.0 °C

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Strip, Sheet, Plate, Tube, Bar

Specific heat capacity

20.0 °C

921.0 J/(kg·K)

Show Material materials with Specific heat capacity of 921.0 J/(kg·K)

O

EN 573-3

Rod, Flat, Tube

Thermal conductivity

20.0 °C

130.0 - 200.0 W/(m·K)

Show Material materials with Thermal conductivity of 130.0 - 200.0 W/(m·K)

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Rod, Flat, Tube, Strip, Sheet, Plate, Bar

Electrical

PropertyTemperatureValueConditionRelated StandardsShape

Electrical conductivity

20.0 °C

18000000.0 - 28000000.0 S/m

Show Material materials with Electrical conductivity of 18000000.0 - 28000000.0 S/m

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Rod, Flat, Tube, Strip, Sheet, Plate, Bar

Electrical resistivity

3.57e-08 - 5.56e-08 Ω·m

Show Material materials with Electrical resistivity of 3.57e-08 - 5.56e-08 Ω·m

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Strip, Sheet, Plate, Tube, Bar

Chemical properties

PropertyValueConditionRelated StandardsShape

Chromium

0.1 %

Show Material materials with Chromium of 0.1 %

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Flat, Rod, Tube, Strip, Sheet, Plate, Bar

Copper

3.5 - 4.5 %

Show Material materials with Copper of 3.5 - 4.5 %

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Flat, Rod, Tube, Strip, Sheet, Plate, Bar

Iron

0.7 %

Show Material materials with Iron of 0.7 %

O

EN 573-3

Flat, Rod, Tube

0.70 %

Show Material materials with Iron of 0.70 %

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Strip, Sheet, Plate, Tube, Bar

Magnesium

0.4 - 1.0 %

Show Material materials with Magnesium of 0.4 - 1.0 %

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Flat, Rod, Tube, Strip, Sheet, Plate, Bar

Manganese

0.4 - 1.0 %

Show Material materials with Manganese of 0.4 - 1.0 %

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Flat, Rod, Tube, Strip, Sheet, Plate, Bar

Silicon

0.2 - 0.8 %

Show Material materials with Silicon of 0.2 - 0.8 %

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Flat, Rod, Tube, Strip, Sheet, Plate, Bar

Zinc

0.25 %

Show Material materials with Zinc of 0.25 %

O

EN 573-3, EN 1715-3, EN 485, EN 754, EN 755

Flat, Rod, Tube, Strip, Sheet, Plate, Bar

Technological properties

Property
Anodizing

decorative: not suitable, Protective: good

Brazing

hard brazing (with flux/ without flux): not suitable / not suitable, friction soldering: acceptable, soft brazing with flux: not suitable

Corrosion properties

Seawater: poor, weathering: sufficient

Workability

Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) acceptable (O) / acceptable (O)