General
Property | Value | Testing Standard | Comment |
---|---|---|---|
Bulk density | 0.7 g/cm³ Show Supplier Material materials with Bulk density of 0.7 g/cm³ | EN ISO 60 | |
Density | 1.48 g/cm³ Show Supplier Material materials with Density of 1.48 g/cm³ | ||
Water absorption | 1.5 % Show Supplier Material materials with Water absorption of 1.5 % | DIN EN ISO 62 | 23°C | 50 % r.h. up to saturation |
Mechanical
Property | Value | Testing Standard | Comment |
---|---|---|---|
Elastic modulus | 8.1 GPa Show Supplier Material materials with Elastic modulus of 8.1 GPa | DIN EN ISO 527-1 | 50 mm/min |
Elongation | 1.5 % Show Supplier Material materials with Elongation of 1.5 % | DIN EN ISO 527-1 | 50 mm/min |
Impact strength, Charpy unnotched | 11 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 11 kJ/m² | DIN EN ISO 179-1eU | |
Tensile strength | 57 MPa Show Supplier Material materials with Tensile strength of 57 MPa | DIN EN ISO 527-1 | 50 mm/min |
Thermal
Property | Value | Testing Standard | Pressure | Comment | |||
---|---|---|---|---|---|---|---|
Coefficient of thermal expansion | 3.8e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 3.8e-05 1/K | DIN EN ISO 11359-1/2.5 | at 23-100°C | ||||
4.7e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 4.7e-05 1/K | DIN EN ISO 11359-1/2 | at 23-100°C, Transverse | |||||
7.1e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 7.1e-05 1/K | DIN EN ISO 11359-1/2 | at 100-150°C | |||||
7.4e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 7.4e-05 1/K | DIN EN ISO 11359-1/2 | at 100-150°C, Transverse | |||||
Glass transition temperature | 50 °C Show Supplier Material materials with Glass transition temperature of 50 °C | DIN 53765 | |||||
Heat deflection temperature | 232 °C Show Supplier Material materials with Heat deflection temperature of 232 °C | ISO-R 75 Method A | 1.8 MPa | ||||
Max service temperature | 110 °C Show Supplier Material materials with Max service temperature of 110 °C | Long | |||||
170 °C Show Supplier Material materials with Max service temperature of 170 °C | Short | ||||||
Melting point | 255 °C Show Supplier Material materials with Melting point of 255 °C | DIN 53765 | |||||
Specific heat capacity | 1500 J/(kg·K) Show Supplier Material materials with Specific heat capacity of 1500 J/(kg·K) | DIN EN 821 | |||||
Thermal conductivity | 2.8 W/(m·K) Show Supplier Material materials with Thermal conductivity of 2.8 W/(m·K) | DIN EN 821 | through-plane | ||||
11.2 W/(m·K) Show Supplier Material materials with Thermal conductivity of 11.2 W/(m·K) | DIN EN 821 | in-plane | |||||
Thermal diffusivity | 1.3 mm²/s Show Supplier Material materials with Thermal diffusivity of 1.3 mm²/s | DIN EN 821 | through-plane | ||||
5.1 mm²/s Show Supplier Material materials with Thermal diffusivity of 5.1 mm²/s | DIN EN 821 | in-plane | |||||
Flammability | UL94 class HB, DIN IEC 60695-11-10 |
Electrical
Property | Value | Testing Standard | Comment |
---|---|---|---|
Surface resistivity | 10000 Ω/sq Show Supplier Material materials with Surface resistivity of 10000 Ω/sq | DIN EN 61340-2-3 | max. |
Volume resistivity | 350000 Ω·cm Show Supplier Material materials with Volume resistivity of 350000 Ω·cm | DIN EN ISO 3915 | |
1e+06 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+06 Ω·cm | DIN EN 61340-2-3 |
Rheological Properties
Property | Value | Testing Standard | Comment |
---|---|---|---|
Melt mass-flow rate | 36 g/10min Show Supplier Material materials with Melt mass-flow rate of 36 g/10min | DIN EN ISO 1133 | 230°C/2.16kg |
Shrinkage | 0.78 % Show Supplier Material materials with Shrinkage of 0.78 % | DIN EN ISO 294-4 | |
1.02 % Show Supplier Material materials with Shrinkage of 1.02 % | DIN EN ISO 294-4 | Transverse |
Technological properties
Property | ||
---|---|---|
Application areas | Electrical engineering , Mechanical engineering , Automotive industry camera, moulded interconnect device (PCB, LDS), power distribution in electronics and radar | |
Color | Black | |
Fillers | Graphite | |
Processing methods | Drying temperature (°C): 80, drying time (h): 5, mould temperature (°C): 150, material temperature (°C): , cylinder/processing temperature (°C): 295 |