Properties
General
| Property | Value |
|---|---|
Density | 1.26 g/cm³ Show Supplier Material materials with Density of 1.26 g/cm³ |
Mechanical
| Property | Value | Testing Standard |
|---|---|---|
Elastic modulus | 1.4 GPa Show Supplier Material materials with Elastic modulus of 1.4 GPa | DIN EN ISO 527-1 |
Elongation | 35 % Show Supplier Material materials with Elongation of 35 % | DIN EN ISO 527-1 |
Impact strength, Charpy unnotched | 115 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 115 kJ/m² | DIN EN ISO 179-1eU |
Tensile strength | 16 MPa Show Supplier Material materials with Tensile strength of 16 MPa | DIN EN ISO 527-1 |
Thermal
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Glass transition temperature | -8 °C Show Supplier Material materials with Glass transition temperature of -8 °C | ||
Max service temperature | 100 °C Show Supplier Material materials with Max service temperature of 100 °C | Long | |
130 °C Show Supplier Material materials with Max service temperature of 130 °C | Short | ||
Melting point | 165 °C Show Supplier Material materials with Melting point of 165 °C | DIN 53765 |
Rheological Properties
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Melt mass-flow rate | 11 g/10min Show Supplier Material materials with Melt mass-flow rate of 11 g/10min | DIN EN ISO 1133 | 230°C/2.16kg |
Technological properties
| Property | ||
|---|---|---|
| Certifications | Explanation of food contact according to FDA and EU 10/2011 on request | |
| Color | Blue | |
| Detectability | Inductive: 6 mm Al | |
| Fillers | Detectable Filler | |
| Processing methods | Permissible residual moisture content (%): 0.1, drying temperature (°C): 100, drying time (h): 2, mould temperature (°C): 100, material temperature (°C): 250, cylinder/processing temperature (°C): 260 | |