General
Property | Value | Testing Standard | Comment |
---|---|---|---|
Bulk density | 0.72 g/cm³ Show Supplier Material materials with Bulk density of 0.72 g/cm³ | EN ISO 60 | |
Density | 1.27 g/cm³ Show Supplier Material materials with Density of 1.27 g/cm³ | ||
Water absorption | 2.3 % Show Supplier Material materials with Water absorption of 2.3 % | DIN EN ISO 62 | 23°C | 50 % r.h. up to saturation |
Mechanical
Property | Value | Testing Standard |
---|---|---|
Elastic modulus | 3 GPa Show Supplier Material materials with Elastic modulus of 3 GPa | DIN EN ISO 527-1 |
Elongation | 14.1 % Show Supplier Material materials with Elongation of 14.1 % | DIN EN ISO 527-1 |
Flexural modulus | 2.6 GPa Show Supplier Material materials with Flexural modulus of 2.6 GPa | DIN EN ISO 178 |
Flexural strain | 5.7 % Show Supplier Material materials with Flexural strain of 5.7 % | DIN EN ISO 178 |
Flexural strength | 93 MPa Show Supplier Material materials with Flexural strength of 93 MPa | DIN EN ISO 178 |
Impact strength, Charpy unnotched | 113 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 113 kJ/m² | DIN EN ISO 179-1eU |
Tensile strength | 65 MPa Show Supplier Material materials with Tensile strength of 65 MPa | DIN EN ISO 527-1 |
Thermal
Property | Value | Comment | |
---|---|---|---|
Glass transition temperature | 72 °C Show Supplier Material materials with Glass transition temperature of 72 °C | ||
Max service temperature | 110 °C Show Supplier Material materials with Max service temperature of 110 °C | Long | |
170 °C Show Supplier Material materials with Max service temperature of 170 °C | Short | ||
Melting point | 260 °C Show Supplier Material materials with Melting point of 260 °C | ||
Flammability | UL94 class HB, DIN IEC 60695-11-10 |
Rheological Properties
Property | Value | Testing Standard | Comment |
---|---|---|---|
Melt mass-flow rate | 20 g/10min Show Supplier Material materials with Melt mass-flow rate of 20 g/10min | DIN EN ISO 1133 | 280°C/2.16kg |
Shrinkage | 2.06 % Show Supplier Material materials with Shrinkage of 2.06 % | DIN EN ISO 294-4 | |
2.16 % Show Supplier Material materials with Shrinkage of 2.16 % | DIN EN ISO 294-4 | Transverse |
Technological properties
Property | ||
---|---|---|
Application areas | Food engineering | |
Certifications | Explanation of food contact according to FDA and EU 10/2011 | |
Color | Blue | |
Detectability | Inductive: 4.7 mm Al | |
Fillers | Detectable Filler | |
Processing methods | Permissible residual moisture content (%): 0.1, drying temperature (°C): 80, drying time (h): 8, mould temperature (°C): 150, material temperature (°C): 310, cylinder/processing temperature (°C): 310 |