General
Property | Value | Testing Standard | Comment |
---|---|---|---|
Bulk density | 0.8 g/cm³ Show Supplier Material materials with Bulk density of 0.8 g/cm³ | EN ISO 60 | |
Density | 1.43 g/cm³ Show Supplier Material materials with Density of 1.43 g/cm³ | ||
Water absorption | 2 % Show Supplier Material materials with Water absorption of 2 % | DIN EN ISO 62 | 23°C | 50 % r.h. up to saturation |
Mechanical
Property | Value | Testing Standard |
---|---|---|
Elastic modulus | 3.2 GPa Show Supplier Material materials with Elastic modulus of 3.2 GPa | DIN EN ISO 527-1 |
Elongation | 10.8 % Show Supplier Material materials with Elongation of 10.8 % | DIN EN ISO 527-1 |
Flexural modulus | 2.8 GPa Show Supplier Material materials with Flexural modulus of 2.8 GPa | DIN EN ISO 178 |
Flexural strain | 5.5 % Show Supplier Material materials with Flexural strain of 5.5 % | DIN EN ISO 178 |
Flexural strength | 90 MPa Show Supplier Material materials with Flexural strength of 90 MPa | DIN EN ISO 178 |
Impact strength, Charpy unnotched | 84 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 84 kJ/m² | DIN EN ISO 179-1eU |
Tensile strength | 60 MPa Show Supplier Material materials with Tensile strength of 60 MPa | DIN EN ISO 527-1 |
Thermal
Property | Value | Comment | |
---|---|---|---|
Glass transition temperature | 72 °C Show Supplier Material materials with Glass transition temperature of 72 °C | ||
Max service temperature | 110 °C Show Supplier Material materials with Max service temperature of 110 °C | Long | |
170 °C Show Supplier Material materials with Max service temperature of 170 °C | Short | ||
Melting point | 260 °C Show Supplier Material materials with Melting point of 260 °C | ||
Flammability | UL94 class HB, DIN IEC 60695-11-10 |
Rheological Properties
Property | Value | Testing Standard | Comment |
---|---|---|---|
Melt mass-flow rate | 25 g/10min Show Supplier Material materials with Melt mass-flow rate of 25 g/10min | DIN EN ISO 1133 | 280°C/2.16kg |
Melt volume-flow rate | 21 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 21 cm³/10min | DIN EN ISO 1133 | 280°C/2.16kg |
Shrinkage | 1.81 % Show Supplier Material materials with Shrinkage of 1.81 % | DIN EN ISO 294-4 | |
2.26 % Show Supplier Material materials with Shrinkage of 2.26 % | DIN EN ISO 294-4 | Transverse |
Technological properties
Property | ||
---|---|---|
Application areas | Food engineering | |
Certifications | Explanation of food contact according to FDA and EU 10/2011 | |
Color | Blue | |
Detectability | Inductive: 5.5 mm Al | |
Fillers | Detectable Filler | |
Processing methods | Permissible residual moisture content (%): 0.1, drying temperature (°C): 80, drying time (h): 8, mould temperature (°C): 150, material temperature (°C): 310, cylinder/processing temperature (°C): 310 |