TECACOMP LCP LDS black 4107

Want to keep this datasheet? Save it now in your required format

Description

LCP (Liquid crystal polymer) developed for the LPKF-LDS® process with low thermal expansion

This material data has been provided by Ensinger GmbH.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.73 g/cm³

Show Supplier Material materials with Density of 1.73 g/cm³

Water absorption

23.0 °C

0.1 %

Show Supplier Material materials with Water absorption of 0.1 %

max., DIN EN ISO 62, 23 °C / 50 % relative humidity up to saturation

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

11.5 GPa

Show Supplier Material materials with Elastic modulus of 11.5 GPa

DIN EN ISO 527-1, 50mm/min

Elongation

23.0 °C

1.3 %

Show Supplier Material materials with Elongation of 1.3 %

DIN EN ISO 527-1, 50mm/min

Impact strength, Charpy unnotched

23.0 °C

10 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 10 kJ/m²

DIN EN ISO 179-1eU

Tensile strength

23.0 °C

95 MPa

Show Supplier Material materials with Tensile strength of 95 MPa

DIN EN ISO 527-1, 50mm/min

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

75.0 °C

1.6E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.6E-5 1/K

DIN EN ISO 11359-1;2, values applicable for the range 75±25°C, 125±25°C, 175±25°C, 225±25°C

125.0 °C

2.5E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 2.5E-5 1/K

DIN EN ISO 11359-1;2, values applicable for the range 75±25°C, 125±25°C, 175±25°C, 225±25°C

175.0 °C

3E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 3E-5 1/K

DIN EN ISO 11359-1;2, values applicable for the range 75±25°C, 125±25°C, 175±25°C, 225±25°C

225.0 °C

3.4E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 3.4E-5 1/K

DIN EN ISO 11359-1;2, values applicable for the range 75±25°C, 125±25°C, 175±25°C, 225±25°C

Coefficient of thermal expansion, transverse

75.0 °C

3.2E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion, transverse of 3.2E-5 1/K

DIN EN ISO 11359-1;2, values applicable for the range 75±25°C, 125±25°C, 175±25°C, 225±25°C

125.0 °C

4E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion, transverse of 4E-5 1/K

DIN EN ISO 11359-1;2, values applicable for the range 75±25°C, 125±25°C, 175±25°C, 225±25°C

175.0 °C

4.9E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion, transverse of 4.9E-5 1/K

DIN EN ISO 11359-1;2, values applicable for the range 75±25°C, 125±25°C, 175±25°C, 225±25°C

225.0 °C

6E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion, transverse of 6E-5 1/K

DIN EN ISO 11359-1;2, values applicable for the range 75±25°C, 125±25°C, 175±25°C, 225±25°C

Unlock all property charts

Heat deflection temperature, 1.80 MPa

274 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 274 °C

ISO-R 75 Method A

Max service temperature, long

200 °C

Show Supplier Material materials with Max service temperature, long of 200 °C

Max service temperature, short

260 °C

Show Supplier Material materials with Max service temperature, short of 260 °C

Melting point

320 °C

Show Supplier Material materials with Melting point of 320 °C

DIN 53765

Specific heat capacity

23.0 °C

1250 J/(kg·K)

Show Supplier Material materials with Specific heat capacity of 1250 J/(kg·K)

DIN EN 821

Thermal conductivity, in-plane

23.0 °C

1.61 W/(m·K)

Show Supplier Material materials with Thermal conductivity, in-plane of 1.61 W/(m·K)

DIN EN 821

Thermal conductivity, through-plane

23.0 °C

0.76 W/(m·K)

Show Supplier Material materials with Thermal conductivity, through-plane of 0.76 W/(m·K)

DIN EN 821

Thermal diffusivity, in-plane

23.0 °C

0.93 mm²/s

Show Supplier Material materials with Thermal diffusivity, in-plane of 0.93 mm²/s

DIN EN 821

Thermal diffusivity, through-plane

23.0 °C

0.31 mm²/s

Show Supplier Material materials with Thermal diffusivity, through-plane of 0.31 mm²/s

DIN EN 821

Flammability

UL94 class V0 for 3mm thickness, DIN IEC 60695-11-10

Electrical

PropertyTemperatureValueComment

Comparative tracking index

23.0 °C

275 V

Show Supplier Material materials with Comparative tracking index of 275 V

DIN EN 60112

Dielectric constant, 1KHz

23.0 °C

4.01 [-]

Show Supplier Material materials with Dielectric constant, 1KHz of 4.01 [-]

DIN 53483-1

Loss factor

23.0 °C

0.02 [-]

Show Supplier Material materials with Loss factor of 0.02 [-]

DIN 53483-1, 1KHz

Surface resistivity

23.0 °C

4.10E+12 Ω/sq

Show Supplier Material materials with Surface resistivity of 4.10E+12 Ω/sq

DIN EN 61340-2-3

Volume resistivity

23.0 °C

3.80E+12 Ω·cm

Show Supplier Material materials with Volume resistivity of 3.80E+12 Ω·cm

DIN EN 61340-2-3

Rheological Properties

PropertyTemperatureValueComment

Shrinkage

23.0 °C

0.1 %

Show Supplier Material materials with Shrinkage of 0.1 %

DIN EN ISO 294-4

Shrinkage, transverse

23.0 °C

0.3 %

Show Supplier Material materials with Shrinkage, transverse of 0.3 %

DIN EN ISO 294-4

Technological properties

Property
Application areas

Electrical engineering, LED lighting technology, Mechanical engineering, Automotive industry

camera, moulded interconnect device (PCB, LDS), power distribution in electronics and radar

Certifications

Listing at UL (Yellow Card - E487265)

Color

Black

Detectability

Processing methods

Permissible residual moisture content (%): 0.1,

drying temperature (°C): 150, drying time (h): 3, mould temperature (°C): 160, material temperature (°C): 320, cylinder/processing temperature (°C): 320-340, back pressure (bar): 300-600, injection rate: fast

Surface Finish

Laser Marking Parameter- Power: 2-5 W - Frequency: 100-200 kHz - Forw ard movement: 1.6-3.2 m/s