General
Property | Value | Testing Standard | Comment |
---|---|---|---|
Density | 1.59 g/cm³ Show Supplier Material materials with Density of 1.59 g/cm³ | ||
Water absorption | 0.1 % Show Supplier Material materials with Water absorption of 0.1 % | DIN EN ISO 62 | max. | 23°C | 50 % r.h. up to saturation |
Mechanical
Property | Value | Testing Standard |
---|---|---|
Elastic modulus | 8.5 GPa Show Supplier Material materials with Elastic modulus of 8.5 GPa | DIN EN ISO 527-1 |
Elongation | 1 % Show Supplier Material materials with Elongation of 1 % | DIN EN ISO 527-1 |
Impact strength, Charpy unnotched | 8 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 8 kJ/m² | DIN EN ISO 179-1eU |
Tensile strength | 45 MPa Show Supplier Material materials with Tensile strength of 45 MPa | DIN EN ISO 527-1 |
Thermal
Property | Value | Testing Standard | Pressure | Comment | |||
---|---|---|---|---|---|---|---|
Coefficient of thermal expansion | 6.5e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 6.5e-05 1/K | DIN EN ISO 11359-1/2 | at 23-100°C | ||||
8.5e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 8.5e-05 1/K | DIN EN ISO 11359-1/2 | at 23-100°C, Transverse | |||||
Glass transition temperature | 60 °C Show Supplier Material materials with Glass transition temperature of 60 °C | DIN 53765 | |||||
Heat deflection temperature | 190 °C Show Supplier Material materials with Heat deflection temperature of 190 °C | ISO-R 75 Method A | 1.8 MPa | ||||
Max service temperature | 110 °C Show Supplier Material materials with Max service temperature of 110 °C | Long | |||||
170 °C Show Supplier Material materials with Max service temperature of 170 °C | Short | ||||||
Melting point | 225 °C Show Supplier Material materials with Melting point of 225 °C | DIN 53765 | |||||
Specific heat capacity | 1500 J/(kg·K) Show Supplier Material materials with Specific heat capacity of 1500 J/(kg·K) | DIN EN 821 | |||||
Thermal conductivity | 3 W/(m·K) Show Supplier Material materials with Thermal conductivity of 3 W/(m·K) | DIN EN 821 | through-plane | ||||
11.5 W/(m·K) Show Supplier Material materials with Thermal conductivity of 11.5 W/(m·K) | DIN EN 821 | in-plane | |||||
Flammability | UL94 class HB, DIN IEC 60695-11-10 |
Electrical
Property | Value | Testing Standard | Comment |
---|---|---|---|
Surface resistivity | 10000 Ω/sq Show Supplier Material materials with Surface resistivity of 10000 Ω/sq | DIN EN 61340-2-3 | max. |
Volume resistivity | 1e+06 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+06 Ω·cm | DIN EN 61340-2-3 | max. |
Rheological Properties
Property | Value | Testing Standard | Comment |
---|---|---|---|
Melt mass-flow rate | 19 g/10min Show Supplier Material materials with Melt mass-flow rate of 19 g/10min | DIN EN ISO 1133 | 280°C/5kg |
Melt volume-flow rate | 12 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 12 cm³/10min | DIN EN ISO 1133 | 280°C/5kg |
Shrinkage | 0.8 % Show Supplier Material materials with Shrinkage of 0.8 % | DIN EN ISO 294-4 | |
0.9 % Show Supplier Material materials with Shrinkage of 0.9 % | DIN EN ISO 294-4 | Transverse |
Technological properties
Property | ||
---|---|---|
Application areas | Electrical engineering , Mechanical engineering , Automotive industry camera, moulded interconnect device (PCB, LDS), power distribution in electronics and radar | |
Color | Black | |
Fillers | Graphite | |
Processing methods | Permissible residual moisture content (%): 0.02, drying temperature (°C): 120, drying time (h): 6, mould temperature (°C): 130, material temperature (°C): 280, cylinder/processing temperature (°C): 270 |