General
Property | Value |
---|---|
Density | 1.27 g/cm³ Show Supplier Material materials with Density of 1.27 g/cm³ |
Mechanical
Property | Value | Testing Standard |
---|---|---|
Elastic modulus | 2.9 GPa Show Supplier Material materials with Elastic modulus of 2.9 GPa | DIN EN ISO 527-1 |
Elongation | 17.5 % Show Supplier Material materials with Elongation of 17.5 % | DIN EN ISO 527-1 |
Flexural modulus | 2.5 GPa Show Supplier Material materials with Flexural modulus of 2.5 GPa | DIN EN ISO 178 |
Flexural strength | 91 MPa Show Supplier Material materials with Flexural strength of 91 MPa | DIN EN ISO 178 |
Impact strength, Charpy unnotched | 135 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 135 kJ/m² | DIN EN ISO 179-1eU |
Tensile strength | 62 MPa Show Supplier Material materials with Tensile strength of 62 MPa | DIN EN ISO 527-1 |
Thermal
Property | Value | Comment |
---|---|---|
Glass transition temperature | 60 °C Show Supplier Material materials with Glass transition temperature of 60 °C | |
Max service temperature | 100 °C Show Supplier Material materials with Max service temperature of 100 °C | Long |
180 °C Show Supplier Material materials with Max service temperature of 180 °C | Short | |
Melting point | 220 °C Show Supplier Material materials with Melting point of 220 °C |
Rheological Properties
Property | Value | Testing Standard | Comment |
---|---|---|---|
Melt mass-flow rate | 37 g/10min Show Supplier Material materials with Melt mass-flow rate of 37 g/10min | DIN EN ISO 1133 | 230°C/2.16kg |
Technological properties
Property | ||
---|---|---|
Certifications | Explanation of food contact according to FDA and EU 10/2011 on request | |
Color | Blue | |
Detectability | Inductive: 4.7 mm Al | |
Fillers | Detectable Filler | |
Processing methods | Permissible residual moisture content (%): 0.1, drying temperature (°C): 80, drying time (h): 5, mould temperature (°C): 140, material temperature (°C): 290, cylinder/processing temperature (°C): 290 |