TECACOMP PE ID black 1054878 no datasheet

Alternative and trade names
PE-MD
Want to keep this datasheet? Save it now in your required format

Description

PE (Polyethylene) with detectable filler. Main features: detectable via metal detector, x-ray detectable and Explanation of food contact according to FDA and EU 10/2011 on request

Equivalent Materials

This material data has been provided by Ensinger GmbH.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueTesting StandardComment

Bulk density

1.11 g/cm³

Show Supplier Material materials with Bulk density of 1.11 g/cm³

EN ISO 60

Density

2.38 g/cm³

Show Supplier Material materials with Density of 2.38 g/cm³

Water absorption

0.1 %

Show Supplier Material materials with Water absorption of 0.1 %

DIN EN ISO 62

max. | 23°C | 50 % r.h. up to saturation

Mechanical

PropertyValueTesting Standard

Elastic modulus

0.91 GPa

Show Supplier Material materials with Elastic modulus of 0.91 GPa

DIN EN ISO 527-1

Elongation

12 %

Show Supplier Material materials with Elongation of 12 %

DIN EN ISO 527-1

Flexural modulus

0.6 GPa

Show Supplier Material materials with Flexural modulus of 0.6 GPa

DIN EN ISO 178

Flexural strain

12 %

Show Supplier Material materials with Flexural strain of 12 %

DIN EN ISO 178

Flexural strength

20 MPa

Show Supplier Material materials with Flexural strength of 20 MPa

DIN EN ISO 178

Impact strength, Charpy unnotched

60 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 60 kJ/m²

DIN EN ISO 179-1eU

Tensile strength

14 MPa

Show Supplier Material materials with Tensile strength of 14 MPa

DIN EN ISO 527-1

Thermal

PropertyValueTesting StandardComment

Glass transition temperature

-100 °C

Show Supplier Material materials with Glass transition temperature of -100 °C

DIN 53765

Max service temperature

70 °C

Show Supplier Material materials with Max service temperature of 70 °C

Long

100 °C

Show Supplier Material materials with Max service temperature of 100 °C

Short

Melting point

109 °C

Show Supplier Material materials with Melting point of 109 °C

Rheological Properties

PropertyValueTesting StandardComment

Melt mass-flow rate

12.4 g/10min

Show Supplier Material materials with Melt mass-flow rate of 12.4 g/10min

DIN EN ISO 1133

230°C/5kg

Melt volume-flow rate

6.1 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 6.1 cm³/10min

DIN EN ISO 1133

Shrinkage

1.6 %

Show Supplier Material materials with Shrinkage of 1.6 %

DIN EN ISO 294-4

Transverse

1.67 %

Show Supplier Material materials with Shrinkage of 1.67 %

DIN EN ISO 294-4

Technological properties

Property
Certifications

Explanation of food contact according to FDA and EU 10/2011 on request

Color

Black

Fillers

Detectable Filler

Processing methods

Permissible residual moisture content (%): 0.1, drying temperature (°C): 80, drying time (h): 44231, mould temperature (°C): 30-60, material temperature (°C): 200-240, cylinder/processing temperature (°C): 190-240