TECACOMP PP ID blue 1061097

Alternative and trade names
PP-MD
Want to keep this datasheet? Save it now in your required format

Description

PP (Polypropylene) filled with detectable filler. Main features : detectable via metal detector , x-ray detectable, Explanation of food contact according to FDA and EU 10/2011 on request

Equivalent Materials

This material data has been provided by Ensinger GmbH.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

Mechanical

PropertyValueTesting Standard

Elastic modulus

2.3 GPa

Show Supplier Material materials with Elastic modulus of 2.3 GPa

DIN EN ISO 527-1

Elongation

58 %

Show Supplier Material materials with Elongation of 58 %

DIN EN ISO 527-1

Impact strength, Charpy unnotched

34 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 34 kJ/m²

DIN EN ISO 179-1eU

Tensile strength

25 MPa

Show Supplier Material materials with Tensile strength of 25 MPa

DIN EN ISO 527-1

Thermal

PropertyValueTesting StandardComment

Glass transition temperature

13 °C

Show Supplier Material materials with Glass transition temperature of 13 °C

Max service temperature

100 °C

Show Supplier Material materials with Max service temperature of 100 °C

Long

130 °C

Show Supplier Material materials with Max service temperature of 130 °C

Short

Melting point

165 °C

Show Supplier Material materials with Melting point of 165 °C

DIN 53765

Rheological Properties

PropertyValueTesting StandardComment

Melt mass-flow rate

4 g/10min

Show Supplier Material materials with Melt mass-flow rate of 4 g/10min

DIN EN ISO 1133

230°C/2.16kg

Technological properties

Property
Certifications

Explanation of food contact according to FDA and EU 10/2011

Color

Blue

Fillers

Detectable Filler

Processing methods

Permissible residual moisture content (%): 0.1, drying temperature (°C): 70-100, drying time (h): 2, mould temperature (°C): 40-100, material temperature (°C): 230-250, cylinder/processing temperature (°C): 200-260