TECACOMP PPS HTE PW black 1014976

Want to keep this datasheet? Save it now in your required format

Description

PPS (Polyphenylensulfide), main features: for hot compression molding, high electrical conductivity and high thermal conductivity

This material data has been provided by Ensinger GmbH.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValueComment

Bulk density

23.0 °C

0.55 g/cm³

Show Supplier Material materials with Bulk density of 0.55 g/cm³

EN ISO 60

Density

23.0 °C

2 g/cm³

Show Supplier Material materials with Density of 2 g/cm³

Water absorption

23.0 °C

0.1 %

Show Supplier Material materials with Water absorption of 0.1 %

max., DIN EN ISO 62, 23 °C / 50 % relative humidity up to saturation

Mechanical

PropertyTemperatureValueComment

Flexural modulus

23.0 °C

15.1 GPa

Show Supplier Material materials with Flexural modulus of 15.1 GPa

DIN EN ISO 178

Flexural strain

23.0 °C

0.1 %

Show Supplier Material materials with Flexural strain of 0.1 %

DIN EN ISO 178

Flexural strength

23.0 °C

40 MPa

Show Supplier Material materials with Flexural strength of 40 MPa

DIN EN ISO 178

Impact strength, Charpy unnotched

23.0 °C

1.3 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 1.3 kJ/m²

DIN EN ISO 179-1eU

Thermal

PropertyTemperatureValueComment

Max service temperature

200 - 280 °C

Show Supplier Material materials with Max service temperature of 200 - 280 °C

Max service temperature, long

200 - 240 °C

Show Supplier Material materials with Max service temperature, long of 200 - 240 °C

Max service temperature, short

280 °C

Show Supplier Material materials with Max service temperature, short of 280 °C

Specific heat capacity

23.0 °C

900 J/(kg·K)

Show Supplier Material materials with Specific heat capacity of 900 J/(kg·K)

DIN EN 821

Thermal conductivity

23.0 °C

25.8 - 85.8 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 25.8 - 85.8 W/(m·K)

Thermal conductivity, in-plane

23.0 °C

85.8 W/(m·K)

Show Supplier Material materials with Thermal conductivity, in-plane of 85.8 W/(m·K)

DIN EN 821

Thermal conductivity, through-plane

23.0 °C

25.8 W/(m·K)

Show Supplier Material materials with Thermal conductivity, through-plane of 25.8 W/(m·K)

DIN EN 821

Thermal diffusivity

23.0 °C

15.3 - 50.9 mm²/s

Show Supplier Material materials with Thermal diffusivity of 15.3 - 50.9 mm²/s

Thermal diffusivity, in-plane

23.0 °C

50.9 mm²/s

Show Supplier Material materials with Thermal diffusivity, in-plane of 50.9 mm²/s

DIN EN 821

Thermal diffusivity, through-plane

23.0 °C

15.3 mm²/s

Show Supplier Material materials with Thermal diffusivity, through-plane of 15.3 mm²/s

DIN EN 821

Flammability

UL94 class V0, DIN IEC 60695-11-10

Electrical

PropertyTemperatureValueComment

Electrical conductivity

23.0 °C

14200 S/m

Show Supplier Material materials with Electrical conductivity of 14200 S/m

DIN EN ISO 3915

Volume resistivity

23.0 °C

7.04E-4 Ω·cm

Show Supplier Material materials with Volume resistivity of 7.04E-4 Ω·cm

DIN EN 61340-2-3

Technological properties

Property
Application areas

Bipolar plates for PEM fuel cells and heat exchanger

Color

Black

Fillers

Graphite