extrudr PLA NX2 Filament

Alternative and trade names
PLA
Want to keep this datasheet? Save it now in your required format

Description

PLA NX2 is made from a renewable biodegradable biocompound.

This material data has been provided by extrudr.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Bio-based content

100 %

Show Supplier Material materials with Bio-based content of 100 %

Density

23.0 °C

1.3 g/cm³

Show Supplier Material materials with Density of 1.3 g/cm³

ISO 1183

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.65 GPa

Show Supplier Material materials with Elastic modulus of 2.65 GPa

ISO 178

Elongation

23.0 °C

19 %

Show Supplier Material materials with Elongation of 19 %

ISO 527

Flexural modulus

23.0 °C

2.65 GPa

Show Supplier Material materials with Flexural modulus of 2.65 GPa

ISO 527

Impact strength, Charpy notched

23.0 °C

7.5 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 7.5 kJ/m²

ISO 179-1/1 eA

Impact strength, Izod notched

23.0 °C

64 kJ/m²

Show Supplier Material materials with Impact strength, Izod notched of 64 kJ/m²

ISO 178

Tensile strength

23.0 °C

49 MPa

Show Supplier Material materials with Tensile strength of 49 MPa

ISO 527

Thermal

PropertyValueComment

Melting point

150 - 170 °C

Show Supplier Material materials with Melting point of 150 - 170 °C

ISO 3146-C

Vicat softening temperature

60 °C

Show Supplier Material materials with Vicat softening temperature of 60 °C

ISO 306

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

3.5 g/10min

Show Supplier Material materials with Melt mass-flow rate of 3.5 g/10min

ISO 1133

Shrinkage

23.0 °C

0.3 %

Show Supplier Material materials with Shrinkage of 0.3 %

ISO 294-4

Technological properties

Property
Application areas

Biocompounds with high impact resistance and a matte surface are suitable for industrial use, rapid prototyping, architecture, food applications, toys and outdoor novelties.

Handling recommendations

Store at room temperature (18-27°C / 65-80°F), out of direct heat and sunlight, and in a dry place. When stored correctly, this material has a shelf life of 1 year.