extrudr DuraPro ASA Filament

Alternative and trade names
extrudr DuraPro ASA Filament

Want to keep this datasheet? Save it now in your required format

Description

Acrylonitrile styrene acrylate (ASA) is an enhanced thermoplastic. It has a wide range of properties, making it suitable for a large number of applications.

This material data has been provided by extrudr.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Applications

Manufacturing

Additive Manufacturing

Fused Filament Fabrication (Fff)

Consumer Goods

Sports Equipment & Facilities

Outdoor Sports Equipment

Materials by this supplier

extrudr PLA NX1 Filament

extrudr Wood Filament

extrudr PETG Filament

extrudr ABS Filament

extrudr GREENTEC PRO Carbon

See all materials by this supplier

Properties

General

Property	Value	Temperature	Comment
Density	1.05 g/cm³ Show Supplier Material materials with Density of 1.05 g/cm³ at 23.0 °C	23.0 °C	ASTM D792

Mechanical

Property	Value	Temperature	Comment
Elastic modulus	2.06 GPa Show Supplier Material materials with Elastic modulus of 2.06 GPa at 23.0 °C	23.0 °C	ASTM D638
Elongation	26 % Show Supplier Material materials with Elongation of 26 % at 23.0 °C	23.0 °C	ASTM D638
Flexural modulus	2.2 GPa Show Supplier Material materials with Flexural modulus of 2.2 GPa at 23.0 °C	23.0 °C	ASTM D790
Flexural strength	74.5 MPa Show Supplier Material materials with Flexural strength of 74.5 MPa at 23.0 °C	23.0 °C	ASTM D790
Impact strength, Izod notched, ASTM	167 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 167 J/m at 23.0 °C	23.0 °C	ASTM D256
Tensile strength	47.6 MPa Show Supplier Material materials with Tensile strength of 47.6 MPa at 23.0 °C	23.0 °C	ASTM D638

Thermal

Property	Value	Comment
Flammability	UL-94 HB
Melting point	180 - 200 °C Show Supplier Material materials with Melting point of 180 - 200 °C	ISO 3146-C
Vicat softening temperature	98 °C Show Supplier Material materials with Vicat softening temperature of 98 °C	ASTM D1525

Rheological Properties

Property	Value	Temperature	Comment
Melt mass-flow rate	12 g/10min Show Supplier Material materials with Melt mass-flow rate of 12 g/10min		ASTM D1238
Shrinkage	0.3 % Show Supplier Material materials with Shrinkage of 0.3 % at 23.0 °C	23.0 °C	ASTM D955

Technological properties

Property
Application areas	The strength, machinibility, durability and weatherability makes ASA the prefered replacement for ABS. It has a higher impact resistance and is ideal for outdoor use due to its UV resistance.
Handling recommendations	Store at room temperature (18-27°C / 65-80°F), out of direct heat and sunlight, and in a dry place. When stored correctly, this material has a shelf life of 1 year.