extrudr GREENTEC PRO Carbon

Alternative and trade names
PLA-CF10

Want to keep this datasheet? Save it now in your required format

Description

GreenTEC PRO Carbon is made from a high-performance and heat resistant renewable biodegradable biopolymer with added 10% black magic carbon fibers.

This material data has been provided by extrudr.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Applications

Manufacturing

Additive Manufacturing

Fused Filament Fabrication (Fff)

Materials by this supplier

extrudr PETG Filament

extrudr PLA NX1 Filament

extrudr Wood Filament

extrudr ABS Filament

extrudr DuraPro ASA Filament

See all materials by this supplier

Properties

General

Property	Temperature	Value	Comment
Bio-based content		90 % Show Supplier Material materials with Bio-based content of 90 %
Density	23.0 °C	1.15 g/cm³ Show Supplier Material materials with Density of 1.15 g/cm³	ISO 1183

Mechanical

Property	Temperature	Value	Comment
Elongation	23.0 °C	2.8 % Show Supplier Material materials with Elongation of 2.8 %	ISO 527
Flexural modulus	23.0 °C	7.12 GPa Show Supplier Material materials with Flexural modulus of 7.12 GPa	ISO 527
Impact strength, Charpy notched	23.0 °C	4.6 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 4.6 kJ/m²	ISO 179-1/1 eA
Impact strength, Charpy unnotched	23.0 °C	82 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 82 kJ/m²	ISO 179-1/1 eU
Tensile strength	23.0 °C	65 MPa Show Supplier Material materials with Tensile strength of 65 MPa	ISO 527

Thermal

Property	Value	Comment
Heat deflection temperature	115 °C Show Supplier Material materials with Heat deflection temperature of 115 °C
Heat deflection temperature, 0.45 MPa	115 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 115 °C	ISO 75/B
Melting point	190 - 240 °C Show Supplier Material materials with Melting point of 190 - 240 °C	ISO 3146-C
Vicat softening temperature	165 °C Show Supplier Material materials with Vicat softening temperature of 165 °C	ISO 306

Rheological Properties

Property	Temperature	Value	Comment
Melt mass-flow rate		9 g/10min Show Supplier Material materials with Melt mass-flow rate of 9 g/10min	ISO 1133
Shrinkage	23.0 °C	0.1 % Show Supplier Material materials with Shrinkage of 0.1 %	ISO 294-4

Technological properties

Property
Application areas	GreenTEC PRO Carbon is designed for extreme industrial use. It has very good mechanical and thermal properties
Fillers	10% Carbon Fiber
Handling recommendations	Store at room temperature (18-27°C / 65-80°F), out of direct heat and sunlight, and in a dry place. When stored correctly, this material has a shelf life of 1 year.