extrudr GreenTEC PRO Filament

Alternative and trade names
extrudr GreenTEC PRO Filament

Want to keep this datasheet? Save it now in your required format

Description

GreenTEC PRO is made from a high-performance and heat-resistant renewable biodegradable biopolymer.

This material data has been provided by extrudr.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Applications

Manufacturing

Additive Manufacturing

Fused Filament Fabrication (Fff)

Materials by this supplier

extrudr PETG Filament

extrudr PLA NX1 Filament

extrudr Wood Filament

extrudr ABS Filament

extrudr DuraPro ASA Filament

See all materials by this supplier

Properties

General

Property	Temperature	Value	Comment
Bio-based content		100 % Show Supplier Material materials with Bio-based content of 100 %
Density	23.0 °C	1.3 g/cm³ Show Supplier Material materials with Density of 1.3 g/cm³	ISO 1183

Mechanical

Property	Temperature	Value	Comment
Elongation	23.0 °C	3 % Show Supplier Material materials with Elongation of 3 %	ISO 527
Flexural modulus	23.0 °C	4.4 GPa Show Supplier Material materials with Flexural modulus of 4.4 GPa	ISO 527
Impact strength, Charpy notched	23.0 °C	4.4 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 4.4 kJ/m²	ISO 179-1/1 eA
Impact strength, Charpy unnotched	23.0 °C	72 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 72 kJ/m²	ISO 179-1/1 eU
Tensile strength	23.0 °C	61 MPa Show Supplier Material materials with Tensile strength of 61 MPa	ISO 527

Thermal

Property	Value	Comment
Melting point	190 - 210 °C Show Supplier Material materials with Melting point of 190 - 210 °C	ISO 3146-C
Vicat softening temperature	160 °C Show Supplier Material materials with Vicat softening temperature of 160 °C	ISO 306

Rheological Properties

Property	Temperature	Value	Comment
Melt mass-flow rate		12 g/10min Show Supplier Material materials with Melt mass-flow rate of 12 g/10min	ISO 1133
Shrinkage	23.0 °C	0.4 % Show Supplier Material materials with Shrinkage of 0.4 %	ISO 294-4

Technological properties

Property
Application areas	GreenTEC PRO is designed for extreme industrial use. It has very good mechanical and thermal properties.
Handling recommendations	Store at room temperature (18-27°C / 65-80°F), out of direct heat and sunlight, and in a dry place. When stored correctly, this material has a shelf life of 1 year.