extrudr Pearl Filament

Alternative and trade names
extrudr Pearl Filament
Want to keep this datasheet? Save it now in your required format

Description

Pearl is made from a renewable biodegradable biopolymer developed for use in design.

This material data has been provided by extrudr.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Bio-based content

100 %

Show Supplier Material materials with Bio-based content of 100 %

Density

23.0 °C

1.25 g/cm³

Show Supplier Material materials with Density of 1.25 g/cm³

ISO 2781

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

1.8 GPa

Show Supplier Material materials with Elastic modulus of 1.8 GPa

ISO 178

Elongation

23.0 °C

6.9 %

Show Supplier Material materials with Elongation of 6.9 %

ISO 527

Flexural modulus

23.0 °C

2.5 GPa

Show Supplier Material materials with Flexural modulus of 2.5 GPa

ISO 527

Flexural strength

23.0 °C

30.1 MPa

Show Supplier Material materials with Flexural strength of 30.1 MPa

ISO 527

Tensile strength

23.0 °C

34 MPa

Show Supplier Material materials with Tensile strength of 34 MPa

ISO 527

Thermal

PropertyValueComment

Heat deflection temperature

51 °C

Show Supplier Material materials with Heat deflection temperature of 51 °C

Heat deflection temperature, 0.45 MPa

51 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 51 °C

ISO 75/B

Vicat softening temperature

58 °C

Show Supplier Material materials with Vicat softening temperature of 58 °C

ISO 306

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

4 g/10min

Show Supplier Material materials with Melt mass-flow rate of 4 g/10min

ISO 1133

Shrinkage

23.0 °C

0.67 %

Show Supplier Material materials with Shrinkage of 0.67 %

ISO 294-4

Technological properties

Property
Application areas

Pearl is characterized by its uniquely silky-smooth surface.

Handling recommendations

Store at room temperature (18-27°C / 65-80°F), out of direct heat and sunlight, and in a dry place. When stored correctly, this material has a shelf life of 1 year.