RADILON S BMX200K 333 BK

Alternative and trade names
PA6-HIT
Want to keep this datasheet? Save it now in your required format

Description

PA6 high viscosity blow moulding grade. Toughened, heat stabilized. Black colour.

Suitable for blow-moulding of tubes and containers; typically used for automotive air ducts.

This material data has been provided by Radici Group.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionTesting StandardThickness

Density

1.06 g/cm³

Show Supplier Material materials with Density of 1.06 g/cm³

dry

ISO 1183

Moisture absorption

1.6 %

Show Supplier Material materials with Moisture absorption of 1.6 %

50% RH

ISO 62

2 mm

Water absorption

5.5 %

Show Supplier Material materials with Water absorption of 5.5 %

ISO 62

2 mm

Mechanical

PropertyTemperatureValueConditionTesting StandardComment

Elastic modulus

0.85 GPa

Show Supplier Material materials with Elastic modulus of 0.85 GPa

50%RH

ISO 527-2/1A

1mm/min

2 GPa

Show Supplier Material materials with Elastic modulus of 2 GPa

dry

ISO 527-2/1A

1mm/min

Elongation

100 %

Show Supplier Material materials with Elongation of 100 %

dry, 50%RH

ISO 527-2/1A

50mm/min, min. C50mm/min

Elongation at yield

4 %

Show Supplier Material materials with Elongation at yield of 4 %

dry

ISO 527-2/1A

Flexural modulus

0.75 GPa

Show Supplier Material materials with Flexural modulus of 0.75 GPa

50%RH

ISO 178

2mm/min

2 GPa

Show Supplier Material materials with Flexural modulus of 2 GPa

dry

ISO 178

2mm/min

Flexural strength

40 MPa

Show Supplier Material materials with Flexural strength of 40 MPa

50%RH

ISO 178

2mm/min

60 MPa

Show Supplier Material materials with Flexural strength of 60 MPa

dry

ISO 178

2mm/min

Impact strength, Charpy notched

-30 °C

25 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 25 kJ/m²

dry

ISO 179/1eA

23 °C

105 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 105 kJ/m²

dry

ISO 179/1eA

23 °C

120 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 120 kJ/m²

50%RH

ISO 179/1eA

Yield strength

35 MPa

Show Supplier Material materials with Yield strength of 35 MPa

50%RH

ISO 527-2/1A

50mm/min

42 MPa

Show Supplier Material materials with Yield strength of 42 MPa

dry

ISO 527-2/1A

50mm/min

Thermal

PropertyValueTesting StandardPressureComment

Heat deflection temperature

55 °C

Show Supplier Material materials with Heat deflection temperature of 55 °C

ISO 75/2Af

2 MPa

Melting point

220 °C

Show Supplier Material materials with Melting point of 220 °C

ISO 11357-1/-3

10°C/min

Flammability

Automotive Interior Flammability(mm/min): <30 ,method: ISO 3795 and thickness tested (mm): 3 | Class: HB ,method: UL 94, and thickness tested (mm): 1.6

Electrical

PropertyValueConditionTesting StandardComment

Surface resistivity

1e+10 Ω/sq

Show Supplier Material materials with Surface resistivity of 1e+10 Ω/sq

50%RH

IEC 60093

500V

1e+12 Ω/sq

Show Supplier Material materials with Surface resistivity of 1e+12 Ω/sq

dry

IEC 60093

500V

Volume resistivity

1e+12 Ω·cm

Show Supplier Material materials with Volume resistivity of 1e+12 Ω·cm

50%RH

IEC 60093

500V

1e+14 Ω·cm

Show Supplier Material materials with Volume resistivity of 1e+14 Ω·cm

dry

IEC 60093

500V

Rheological Properties

PropertyValueTesting StandardConditionComment

Melt mass-flow rate

2 g/10min

Show Supplier Material materials with Melt mass-flow rate of 2 g/10min

ISO 1133

275°C/5Kg

Shrinkage

1.1 %

Show Supplier Material materials with Shrinkage of 1.1 %

ISO 294-4

dry

Transverse

1.4 %

Show Supplier Material materials with Shrinkage of 1.4 %

ISO 294-4

dry

Technological properties

Property
Certifications

RoHS 2011/65/UE

Color

Black

Processing methods

Injection Molding,Blow Molding