General
Property | Value | Condition | Testing Standard | Thickness | Comment |
---|---|---|---|---|---|
Density | 1.52 g/cm³ Show Supplier Material materials with Density of 1.52 g/cm³ | dry | ISO 1183 | ||
Water absorption | 0.1 % Show Supplier Material materials with Water absorption of 0.1 % | ISO 62 | 2 mm | 24h immersion at 23°C |
Mechanical
Property | Temperature | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|---|
Elastic modulus | 14.5 GPa Show Supplier Material materials with Elastic modulus of 14.5 GPa | dry | ISO 527-2/1A | 1mm/min | |
14.8 GPa Show Supplier Material materials with Elastic modulus of 14.8 GPa | 50%RH | ISO 527-2/1A | 1mm/min | ||
Elongation | 2.1 % Show Supplier Material materials with Elongation of 2.1 % | dry | ISO 527-2/1A | 5mm/min | |
2.2 % Show Supplier Material materials with Elongation of 2.2 % | 50%RH | ISO 527-2/1A | 5mm/min | ||
Flexural modulus | 12.7 GPa Show Supplier Material materials with Flexural modulus of 12.7 GPa | 50%RH | ISO 178 | 2mm/min | |
13 GPa Show Supplier Material materials with Flexural modulus of 13 GPa | dry | ISO 178 | 2mm/min | ||
Flexural strength | 310 MPa Show Supplier Material materials with Flexural strength of 310 MPa | 50%RH | ISO 178 | 2mm/min | |
330 MPa Show Supplier Material materials with Flexural strength of 330 MPa | dry | ISO 178 | 2mm/min | ||
Impact strength, Charpy notched | -30 °C | 9.5 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 9.5 kJ/m² | dry | ISO 179/1eA | |
23 °C | 10 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 10 kJ/m² | dry | ISO 179/1eA | ||
23 °C | 11 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 11 kJ/m² | 50%RH | ISO 179/1eA | ||
Impact strength, Charpy unnotched | -30 °C | 60 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 60 kJ/m² | dry | ISO 179/1eU | |
23 °C | 65 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 65 kJ/m² | dry | ISO 179/1eU | ||
23 °C | 70 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 70 kJ/m² | 50%RH | ISO 179/1eU | ||
Tensile strength | 210 MPa Show Supplier Material materials with Tensile strength of 210 MPa | 50%RH | ISO 527-2/1A | 5mm/min | |
240 MPa Show Supplier Material materials with Tensile strength of 240 MPa | dry | ISO 527-2/1A | 5mm/min |
Thermal
Property | Value | Testing Standard | Comment | ||
---|---|---|---|---|---|
Coefficient of thermal expansion | 1.7e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.7e-05 1/K | ISO 11359-1/-2 | 23°C-55°C | ||
5.8e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 5.8e-05 1/K | ISO 11359-1/-2 | 23°C-55°C, Transverse | |||
Heat deflection temperature | 293 °C Show Supplier Material materials with Heat deflection temperature of 293 °C | ISO 75/2Af | 1.80 MPa | ||
Melting point | 325 °C Show Supplier Material materials with Melting point of 325 °C | ISO 11357-1/-3 | 10°C/min | ||
Flammability | Thickness tested (mm): 0.8, Class: HB, Standard: UL 94 |
Electrical
Property | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|
Surface resistivity | 1e+12 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+12 Ω/sq | dry | IEC 60093 | 500V |
Volume resistivity | 1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm | dry | IEC 60093 | 500V |
Rheological Properties
Property | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|
Shrinkage | 0.2 % Show Supplier Material materials with Shrinkage of 0.2 % | 325/140/60* | ISO 294-4 | *Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa] |
0.7 % Show Supplier Material materials with Shrinkage of 0.7 % | 325/140/60* | ISO 294-4 | *Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa], Transverse |
Technological properties
Property | ||
---|---|---|
Additives | Release agent | |
Certifications | RoHS 2011/65/UE, Food and Water Contact (please get in touch with Radici Group): KTW guidlines and DVGW-standard W270 (11/2007), ACS positive lists include the circular DGC/VS4 n°2000/232 dated 27 april 2000 | |
Color | Black | |
Fillers | 40% Glass Fiber | |
Processing methods | Injection Molding |