RADISTRONG AROMA RV500RKC2 306 BK

Alternative and trade names
(PA66+PA)-GF50
Want to keep this datasheet? Save it now in your required format

Description

Special PA 50% glass fibre reinforced, high flow injection moulding grade. Heat stabilized. Drinking water and food contact. Black colour.

General purpose metal replacement product with good resistance to hydrolysis, enhanced mechanical properties after moisture pick-up. Specifically intended for use in applications in civil and industrial water management as well as appliances and consumer goods, requiring very high stiffness, high mechanical resistance, high surface quality and superior gloss.

Equivalent Materials

This material data has been provided by Radici Group.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueConditionTesting StandardThickness

Density

1.59 g/cm³

Show Supplier Material materials with Density of 1.59 g/cm³

dry

ISO 1183

Moisture absorption

23 °C

1.2 %

Show Supplier Material materials with Moisture absorption of 1.2 %

50%RH

ISO 62

2 mm

Mechanical

PropertyTemperatureValueConditionTesting StandardComment

Elastic modulus

15.9 GPa

Show Supplier Material materials with Elastic modulus of 15.9 GPa

50%RH

ISO 527-2/1A

1mm/min

17.9 GPa

Show Supplier Material materials with Elastic modulus of 17.9 GPa

dry

ISO 527-2/1A

1mm/min

Elongation

2.4 %

Show Supplier Material materials with Elongation of 2.4 %

dry

ISO 527-2/1A

5mm/min

2.7 %

Show Supplier Material materials with Elongation of 2.7 %

50%RH

ISO 527-2/1A

5mm/min

Flexural modulus

13.4 GPa

Show Supplier Material materials with Flexural modulus of 13.4 GPa

50%RH

ISO 178

2mm/min

15.2 GPa

Show Supplier Material materials with Flexural modulus of 15.2 GPa

dry

ISO 178

2mm/min

Flexural strength

295 MPa

Show Supplier Material materials with Flexural strength of 295 MPa

50%RH

ISO 178

2mm/min

355 MPa

Show Supplier Material materials with Flexural strength of 355 MPa

dry

ISO 178

2mm/min

Impact strength, Charpy notched

23 °C

15.5 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 15.5 kJ/m²

dry

ISO 179/1eA

23 °C

16 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 16 kJ/m²

50%RH

ISO 179/1eA

Impact strength, Charpy unnotched

98 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 98 kJ/m²

dry

ISO 179/1eU

23°C

104 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 104 kJ/m²

50%RH

ISO 179/1eU

23°C

Tensile strength

190 MPa

Show Supplier Material materials with Tensile strength of 190 MPa

50%RH

ISO 527-2/1A

5mm/min

240 MPa

Show Supplier Material materials with Tensile strength of 240 MPa

dry

ISO 527-2/1A

5mm/min

Thermal

PropertyValueTesting StandardComment

Melting point

260 °C

Show Supplier Material materials with Melting point of 260 °C

ISO 11357-1/-3

10°C/min

Rheological Properties

PropertyValueConditionTesting StandardComment

Shrinkage

0.2 %

Show Supplier Material materials with Shrinkage of 0.2 %

290/80/60*

ISO 294-4

*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa]

0.6 %

Show Supplier Material materials with Shrinkage of 0.6 %

290/80/60*

ISO 294-4

*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa], Transverse

Technological properties

Property
Additives

Release agent

Certifications

Food Contact, RoHS 2011/65/UE

Color

Black

Features

Improved Fluiditiy, Hydrolysis Resistance, High Surface Aspect, Heat Stabilized

Fillers

50% Glass Fiber

Processing methods

Injection Molding