RADISTRONG AROMA RV400RKC2 306 BK

Alternative and trade names
PA66-GF40
Want to keep this datasheet? Save it now in your required format

Description

Special PA 40% glass fibre reinforced, high flow injection moulding grade. Heat stabilized. Drinking water and food contact. Black colour.

Product with high mechanical properties intended for use in direct contact with drinking water and food, along with good hydrolytic stability and chemical resistance to disinfectants. This grade has also high surface quality and high gloss. Suitable for applications in civil and industrial water management as well as appliances.

This material data has been provided by Radici Group.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionTesting Standard

Density

1.47 g/cm³

Show Supplier Material materials with Density of 1.47 g/cm³

dry

ISO 1183

Mechanical

PropertyTemperatureValueConditionTesting StandardComment

Elastic modulus

14 GPa

Show Supplier Material materials with Elastic modulus of 14 GPa

dry

ISO 527-2/1A

1mm/min

Elongation

2 %

Show Supplier Material materials with Elongation of 2 %

dry

ISO 527-2/1A

5mm/min

Flexural modulus

12 GPa

Show Supplier Material materials with Flexural modulus of 12 GPa

dry

ISO 178

2mm/min

Flexural strength

310 MPa

Show Supplier Material materials with Flexural strength of 310 MPa

dry

ISO 178

2mm/min

Impact strength, Charpy notched

23 °C

12 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 12 kJ/m²

dry

ISO 179/1eA

Impact strength, Charpy unnotched

23 °C

70 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 70 kJ/m²

dry

ISO 179/1eU

Tensile strength

215 MPa

Show Supplier Material materials with Tensile strength of 215 MPa

dry

ISO 527-2/1A

5mm/min

Thermal

PropertyValueTesting StandardComment

Melting point

260 °C

Show Supplier Material materials with Melting point of 260 °C

ISO 11357-1/-3

10°C/min

Flammability

Automotive Interior Flammability(mm/min): 0 ,method: ISO 3795 and thickness tested (mm): 3

Technological properties

Property
Certifications

RoHS 2011/65/UE

Color

Black

Fillers

40% Glass Fiber

Processing methods

Injection Molding