HERAFLEX E MTE6305UK 100 NT

Alternative and trade names
TPC

Want to keep this datasheet? Save it now in your required format

Description

TPC-ET Thermoplastic Elastomer. Medium-high Modulus, Nominal Shore D/60. Natural colour. Suitable for Mandrels & Tubes Extrusion.

Equivalent Materials

TPC-ET

This material data has been provided by Radici Group.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

RADICIGROUP HIGH PERFORMANCE POLYMERS

MANUFACTURER

Additional services:

CAE Service: Customized technical support contributing to the success of innovative projects, including metal replacement applications, realized using RADILON®, RADITECK®, RADISTRONG®, RADIFLAM® and RADITER® engineering plastics. This is what RadiciGroup High Performance Polymers can offer its customers, thanks to its state-of-the-art computer-aided engineering (CAE) virtual simulation tools and the experience of its technical specialists.

Materials by this supplier

RADILON A CP300K 333 BK

RADILON AESTUS T1 RV300FC 306K BK

TORZEN Marathon G3500XHL BK20

RADILON NeXTreme RV500HHR 3800 BK

RADITER B RV300 100 NT

See all materials by this supplier

Use cases

Webinar: Metal Replacement with Engineering Polymers

Properties

General

Property	Value	Testing Standard
Density	1.22 g/cm³ Show Supplier Material materials with Density of 1.22 g/cm³	ISO 1183

Mechanical

Property	Temperature	Value	Testing Standard	Comment
Elastic modulus		0.45 GPa Show Supplier Material materials with Elastic modulus of 0.45 GPa	ISO 527-2/1A	1mm/min
Elongation		300 % Show Supplier Material materials with Elongation of 300 %	ISO 527-2/1A	50mm/min \| nominal
Elongation at yield		25 % Show Supplier Material materials with Elongation at yield of 25 %	ISO 527-2/1A	50mm/min
Flexural modulus		0.4 GPa Show Supplier Material materials with Flexural modulus of 0.4 GPa	ISO 178	2mm/min
Flexural strength		20 MPa Show Supplier Material materials with Flexural strength of 20 MPa	ISO 178	2mm/min
Hardness, Shore D		57 [-] Show Supplier Material materials with Hardness, Shore D of 57 [-]	ISO 7619-1	15s
		63 [-] Show Supplier Material materials with Hardness, Shore D of 63 [-]	ISO 7619-1	inst.
Impact strength, Charpy notched	-30 °C	10 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 10 kJ/m²	ISO 179/1eA	No Break at 23°C
Impact strength, Charpy unnotched		No Break at 23°C	ISO 179/1eU
Modulus at 10% elongation		0.02 GPa Show Supplier Material materials with Modulus at 10% elongation of 0.02 GPa	ISO 527-2/1A
Modulus at 100% elongation		0.023 GPa Show Supplier Material materials with Modulus at 100% elongation of 0.023 GPa	ISO 527-2/1A
Modulus at 300% elongation		0.025 GPa Show Supplier Material materials with Modulus at 300% elongation of 0.025 GPa	ISO 527-2/1A
Tensile strength		35 MPa Show Supplier Material materials with Tensile strength of 35 MPa	ISO 527-2/1A	5mm/min
Yield strength		26 MPa Show Supplier Material materials with Yield strength of 26 MPa	ISO 527-2/1A	50mm/min

Thermal

Property	Value	Testing Standard	Comment
Melting point	212 °C Show Supplier Material materials with Melting point of 212 °C	ISO 11357-1/-3	10°C/min

Rheological Properties

Property	Value	Testing Standard	Comment
Melt mass-flow rate	5 g/10min Show Supplier Material materials with Melt mass-flow rate of 5 g/10min	ISO 1133	230°C/2.16Kg

Technological properties

Property
Certifications	RoHS 2011/65/UE
Color	Natural
Features	Impact Modified, UV Stabilized, Heat Stabilized
Processing methods	Profile Extrusion,Other Extrusion