RADILON A CF200 333 BK

Alternative and trade names
PA66-CF20

Want to keep this datasheet? Save it now in your required format

Description

PA66 20% carbon fibre reinforced injection moulding grade. Black colour.

Suitable for parts and components requiring very high mechanical properties: stiffness, dimensional stability, fatigue and creep resistance. The presence of carbon fibres also provides higher electrical and thermal conductivity.

Equivalent Materials

PA66-CF20

This material data has been provided by Radici Group.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

RADICIGROUP HIGH PERFORMANCE POLYMERS

MANUFACTURER

Additional services:

CAE Service: Customized technical support contributing to the success of innovative projects, including metal replacement applications, realized using RADILON®, RADITECK®, RADISTRONG®, RADIFLAM® and RADITER® engineering plastics. This is what RadiciGroup High Performance Polymers can offer its customers, thanks to its state-of-the-art computer-aided engineering (CAE) virtual simulation tools and the experience of its technical specialists.

Materials by this supplier

RADILON A CP300K 333 BK

RADILON AESTUS T1 RV300FC 306K BK

TORZEN Marathon G3500XHL BK20

RADILON NeXTreme RV500HHR 3800 BK

RADITER B RV300 100 NT

See all materials by this supplier

Use cases

Webinar: Metal Replacement with Engineering Polymers

Properties

General

Property	Temperature	Value	Condition	Testing Standard	Thickness	Comment
Density		1.22 g/cm³ Show Supplier Material materials with Density of 1.22 g/cm³	dry	ISO 1183
Moisture absorption	23 °C	1.7 % Show Supplier Material materials with Moisture absorption of 1.7 %	50%RH	ISO 62	2 mm
Water absorption		6 % Show Supplier Material materials with Water absorption of 6 %		ISO 62	2 mm	immersion at 23°C

Mechanical

Property	Temperature	Value	Condition	Testing Standard	Comment
Elastic modulus		10.2 GPa Show Supplier Material materials with Elastic modulus of 10.2 GPa	50%RH	ISO 527-2/1A	1mm/min
		16.5 GPa Show Supplier Material materials with Elastic modulus of 16.5 GPa	dry	ISO 527-2/1A	1mm/min
Elongation		2.3 % Show Supplier Material materials with Elongation of 2.3 %	dry	ISO 527-2/1A	5mm/min
		3.5 % Show Supplier Material materials with Elongation of 3.5 %	50%RH	ISO 527-2/1A	5mm/min
Flexural modulus		13.5 GPa Show Supplier Material materials with Flexural modulus of 13.5 GPa	dry	ISO 178	2mm/min
Flexural strength		310 MPa Show Supplier Material materials with Flexural strength of 310 MPa	dry	ISO 178	2mm/min
Impact strength, Charpy unnotched	23 °C	50 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 50 kJ/m²	dry	ISO 179/1eU
	23 °C	75 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 75 kJ/m²	50%RH	ISO 179/1eU
Tensile strength		150 MPa Show Supplier Material materials with Tensile strength of 150 MPa	50%RH	ISO 527-2/1A	5mm/min
		215 MPa Show Supplier Material materials with Tensile strength of 215 MPa	dry	ISO 527-2/1A	5mm/min

Thermal

Property	Value	Thickness	Testing Standard	Comment
Melting point	260 °C Show Supplier Material materials with Melting point of 260 °C	1000 mm	ISO 11357-1/-3	10°C/min
Flammability	Class: HB, Standard: UL 94 \| Automotive Interior Flammability(mm/min): <10 ,method: ISO 3795 and thickness tested (mm): 3

Electrical

Property	Value	Condition	Testing Standard	Comment
Volume resistivity	100 Ω·cm Show Supplier Material materials with Volume resistivity of 100 Ω·cm	dry, 50%RH	IEC 60093	500V

Technological properties

Property
Additives	Release agent
Certifications	RoHS 2011/65/UE
Color	Black
Features	Increased Electrical Conductivity
Fillers	20% Carbon Fiber
Processing methods	Injection Molding