RADILON D 40EP25ZW 7037 BL

Alternative and trade names
PA610

Want to keep this datasheet? Save it now in your required format

Description

PA610 flexible, high viscosity extrusion grade. Toughened and plasticized. Heat stabilized. Blue colour.

Suitable for extrusion of pipes, profiles and cable jackets. Good impact resistance also at low temperatures. This grade is partially renewably-sourced (60% of base polymer by weight).

Equivalent Materials

PA610

This material data has been provided by Radici Group.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

RADICIGROUP HIGH PERFORMANCE POLYMERS

MANUFACTURER

Additional services:

CAE Service: Customized technical support contributing to the success of innovative projects, including metal replacement applications, realized using RADILON®, RADITECK®, RADISTRONG®, RADIFLAM® and RADITER® engineering plastics. This is what RadiciGroup High Performance Polymers can offer its customers, thanks to its state-of-the-art computer-aided engineering (CAE) virtual simulation tools and the experience of its technical specialists.

Materials by this supplier

RADILON A CP300K 333 BK

RADILON AESTUS T1 RV300FC 306K BK

TORZEN Marathon G3500XHL BK20

RADILON NeXTreme RV500HHR 3800 BK

RADITER B RV300 100 NT

See all materials by this supplier

Use cases

Webinar: Metal Replacement with Engineering Polymers

Properties

General

Property	Temperature	Value	Condition	Testing Standard	Thickness	Comment
Density		1.04 g/cm³ Show Supplier Material materials with Density of 1.04 g/cm³	dry	ISO 1183
Moisture absorption	23 °C	0.9 % Show Supplier Material materials with Moisture absorption of 0.9 %	50%RH	ISO 62	2 mm
Water absorption		2 % Show Supplier Material materials with Water absorption of 2 %		ISO 62	2 mm	immersion at 23°C

Mechanical

Property	Temperature	Value	Condition	Testing Standard	Comment
Elastic modulus		0.38 GPa Show Supplier Material materials with Elastic modulus of 0.38 GPa	50%RH	ISO 527-2/1A	1mm/min
		0.55 GPa Show Supplier Material materials with Elastic modulus of 0.55 GPa	dry	ISO 527-2/1A	1mm/min
Elongation		50 % Show Supplier Material materials with Elongation of 50 %	dry, 50%RH	ISO 527-2/1A	min. \| 5mm/min
Flexural modulus		0.33 GPa Show Supplier Material materials with Flexural modulus of 0.33 GPa	50%RH	ISO 178	2mm/min
		0.48 GPa Show Supplier Material materials with Flexural modulus of 0.48 GPa	dry	ISO 178	2mm/min
Flexural strength		15 MPa Show Supplier Material materials with Flexural strength of 15 MPa	50%RH	ISO 178	2mm/min
		20 MPa Show Supplier Material materials with Flexural strength of 20 MPa	dry	ISO 178	2mm/min
Impact strength, Charpy notched	-30 °C	55 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 55 kJ/m²	dry	ISO 179/1eA
	23 °C	95 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 95 kJ/m²	dry	ISO 179/1eA
	23 °C	110 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 110 kJ/m²	50%RH	ISO 179/1eA
Modulus at 100% elongation		0.023 GPa Show Supplier Material materials with Modulus at 100% elongation of 0.023 GPa	50%RH	ISO 527-2/1A
		0.028 GPa Show Supplier Material materials with Modulus at 100% elongation of 0.028 GPa	dry	ISO 527-2/1A
Modulus at 50% elongation		0.024 GPa Show Supplier Material materials with Modulus at 50% elongation of 0.024 GPa	50%RH	ISO 527-2/1A
		0.027 GPa Show Supplier Material materials with Modulus at 50% elongation of 0.027 GPa	dry	ISO 527-2/1A

Thermal

Property	Value	Testing Standard	Comment
Heat deflection temperature	50 °C Show Supplier Material materials with Heat deflection temperature of 50 °C	ISO 75/2Af	1.80 MPa
	100 °C Show Supplier Material materials with Heat deflection temperature of 100 °C	ISO 75/2Bf	0.45 MPa
Melting point	217 °C Show Supplier Material materials with Melting point of 217 °C	ISO 11357-1/-3	10°C/min

Electrical

Property	Value	Condition	Testing Standard	Comment
Surface resistivity	1e+10 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+10 Ω/sq	50%RH	IEC 60093	500V
	1e+12 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+12 Ω/sq	dry	IEC 60093	500V
Volume resistivity	1e+11 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+11 Ω·cm	50%RH	IEC 60093	500V
	1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm	dry	IEC 60093	500V

Technological properties

Property
Additives	Plasticizer
Certifications	RoHS 2011/65/UE
Color	Blue
Features	Impact Modified, Heat Stabilized
Processing methods	Injection Molding,Profile Extrusion