RADILON DT 22D 1000 NT

Alternative and trade names
PA612

Want to keep this datasheet? Save it now in your required format

Description

PA612 low viscosity. Natural colour.

Suitable for extrusion processes where low viscosity is required, typically monofilament extrusion. Suitable also for injection and rotational moulding operations.

Equivalent Materials

PA612

This material data has been provided by Radici Group.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

RADICIGROUP HIGH PERFORMANCE POLYMERS

MANUFACTURER

Additional services:

CAE Service: Customized technical support contributing to the success of innovative projects, including metal replacement applications, realized using RADILON®, RADITECK®, RADISTRONG®, RADIFLAM® and RADITER® engineering plastics. This is what RadiciGroup High Performance Polymers can offer its customers, thanks to its state-of-the-art computer-aided engineering (CAE) virtual simulation tools and the experience of its technical specialists.

Materials by this supplier

RADILON A CP300K 333 BK

RADILON AESTUS T1 RV300FC 306K BK

TORZEN Marathon G3500XHL BK20

RADILON NeXTreme RV500HHR 3800 BK

RADITER B RV300 100 NT

See all materials by this supplier

Use cases

Webinar: Metal Replacement with Engineering Polymers

Properties

General

Property	Temperature	Value	Condition	Testing Standard	Thickness	Comment
Density		1.06 g/cm³ Show Supplier Material materials with Density of 1.06 g/cm³	dry	ISO 1183
Moisture absorption	23 °C	1.2 % Show Supplier Material materials with Moisture absorption of 1.2 %	50%RH	ISO 62	2 mm
Water absorption		3 % Show Supplier Material materials with Water absorption of 3 %		ISO 62	2 mm	immersion at 23°C

Mechanical

Property	Temperature	Value	Condition	Testing Standard	Comment
Elastic modulus		2.3 GPa Show Supplier Material materials with Elastic modulus of 2.3 GPa	dry	ISO 527-2/1A	1mm/min
Elongation		100 % Show Supplier Material materials with Elongation of 100 %	dry	ISO 527-2/1A	min. \| 50mm/min \| nominal
Elongation at yield		15 % Show Supplier Material materials with Elongation at yield of 15 %	dry	ISO 527-2/1A	50mm/min
Flexural modulus		2.2 GPa Show Supplier Material materials with Flexural modulus of 2.2 GPa	dry	ISO 178	2mm/min
Flexural strength		80 MPa Show Supplier Material materials with Flexural strength of 80 MPa	dry	ISO 178	2mm/min
Impact strength, Charpy notched	23 °C	4.5 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 4.5 kJ/m²	dry	ISO 179/1eA
Impact strength, Charpy unnotched		No Break at 23°C	dry	ISO 179/1eU
Yield strength		60 MPa Show Supplier Material materials with Yield strength of 60 MPa	dry	ISO 527-2/1A	50mm/min

Thermal

Property	Value	Testing Standard	Comment
Melting point	215 °C Show Supplier Material materials with Melting point of 215 °C	ISO 11357-1/-3	10°C/min

Rheological Properties

Property	Value	Testing Standard	Comment
Viscosity number	100 cm³/gr Show Supplier Material materials with Viscosity number of 100 cm³/gr	ISO 307	Sulfuric acid

Technological properties

Property

Certifications

RoHS 2011/65/UE

Color

Natural

Processing methods

Injection Molding