RADILON DT CV300RKC2 306 BK

Alternative and trade names
PA612-GB30

Want to keep this datasheet? Save it now in your required format

Description

PA612 30% glass beads filled, high flow injection moulding grade. Drinking water and food contact. Black colour.

Product with good dimensional stability, reduced shrinkage and low warpage. Intended for use in direct contact with drinking water and food, along with good hydrolytic stability and chemical resistance to disinfectants. Suitable for applications in civil and industrial water management as well as appliances.

Equivalent Materials

PA612-GB30

This material data has been provided by Radici Group.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

RADICIGROUP HIGH PERFORMANCE POLYMERS

MANUFACTURER

Additional services:

CAE Service: Customized technical support contributing to the success of innovative projects, including metal replacement applications, realized using RADILON®, RADITECK®, RADISTRONG®, RADIFLAM® and RADITER® engineering plastics. This is what RadiciGroup High Performance Polymers can offer its customers, thanks to its state-of-the-art computer-aided engineering (CAE) virtual simulation tools and the experience of its technical specialists.

Materials by this supplier

RADILON A CP300K 333 BK

RADILON AESTUS T1 RV300FC 306K BK

TORZEN Marathon G3500XHL BK20

RADILON NeXTreme RV500HHR 3800 BK

RADITER B RV300 100 NT

See all materials by this supplier

Use cases

Webinar: Metal Replacement with Engineering Polymers

Properties

General

Property	Value	Condition	Testing Standard	Thickness	Comment
Density	1.27 g/cm³ Show Supplier Material materials with Density of 1.27 g/cm³	dry	ISO 1183
Water absorption	0.7 % Show Supplier Material materials with Water absorption of 0.7 %		ISO 62	2 mm	24h immersion at 23°C
	1.9 % Show Supplier Material materials with Water absorption of 1.9 %		ISO 62	2 mm	immersion at 23°C

Mechanical

Property	Temperature	Value	Condition	Testing Standard	Comment
Elastic modulus		3.2 GPa Show Supplier Material materials with Elastic modulus of 3.2 GPa	dry	ISO 527-2/1A	1mm/min
Elongation		20 % Show Supplier Material materials with Elongation of 20 %	dry	ISO 527-2/1A	50mm/min \| nominal
Elongation at yield		11 % Show Supplier Material materials with Elongation at yield of 11 %	dry	ISO 527-2/1A	50mm/min
Flexural modulus		3.1 GPa Show Supplier Material materials with Flexural modulus of 3.1 GPa	dry	ISO 178	2mm/min
Flexural strength		95 MPa Show Supplier Material materials with Flexural strength of 95 MPa	dry	ISO 178	2mm/min
Impact strength, Charpy notched	23 °C	4.2 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 4.2 kJ/m²	dry	ISO 179/1eA
Yield strength		61 MPa Show Supplier Material materials with Yield strength of 61 MPa	dry	ISO 527-2/1A	50mm/min

Thermal

Property	Value	Testing Standard	Comment
Melting point	213 °C Show Supplier Material materials with Melting point of 213 °C	ISO 11357-1/-3	10°C/min

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Shrinkage	1.1 % Show Supplier Material materials with Shrinkage of 1.1 %	280/60/60*	ISO 294-4	*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa], Transverse
	1.2 % Show Supplier Material materials with Shrinkage of 1.2 %	280/60/60*	ISO 294-4	*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa]

Technological properties

Property
Additives	Release agent
Certifications	Food Contact, Drinking Water, RoHS 2011/65/UE
Color	Black
Features	Hydrolysis Resistance
Fillers	30% Glass Bead
Processing methods	Injection Molding