Formadur 2083 Superclean Plate

Alternative and trade names
DIN EN ISO X40Cr14, AISI 420, 1.2083, AFNOR Z40C14
Want to keep this datasheet? Save it now in your required format

Description

1.2083 (X40Cr14) Quenched and Tempered steel plate exhibits good corrosion-resistant and excellent polishability.

Equivalent Materials

This material data has been provided by Deutsche Edelstahlwerke Specialty Steel (DEW).

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

Dimension

PropertyValue

Thickness

40 - 350 mm

Show Supplier Material materials with Thickness of 40 - 350 mm

Width

900 - 1100 mm

Show Supplier Material materials with Width of 900 - 1100 mm

Mechanical

PropertyValueTemperatureComment

Hardness, Brinell

230 [-]

Show Supplier Material materials with Hardness, Brinell of 230 [-] at 23.0 °C

23.0 °C

soft annealed

Hardness, Rockwell C

48 - 56 [-]

Show Supplier Material materials with Hardness, Rockwell C of 48 - 56 [-] at 23.0 °C

23.0 °C

Tensile strength

1555 - 1775 MPa

Show Supplier Material materials with Tensile strength of 1555 - 1775 MPa at 23.0 °C

23.0 °C

Thermal

PropertyValueTemperatureComment

Coefficient of thermal expansion

1.11E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.11E-5 1/K at 100.0 °C

100.0 °C

for 20°C to the mentioned temperature

1.13E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.13E-5 1/K at 150.0 °C

150.0 °C

for 20°C to the mentioned temperature

1.16E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.16E-5 1/K at 200.0 °C

200.0 °C

for 20°C to the mentioned temperature

1.18E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.18E-5 1/K at 250.0 °C

250.0 °C

for 20°C to the mentioned temperature

1.2E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.2E-5 1/K at 300.0 °C

300.0 °C

for 20°C to the mentioned temperature

1.23E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.23E-5 1/K at 350.0 °C

350.0 °C

for 20°C to the mentioned temperature

1.24E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.24E-5 1/K at 400.0 °C

400.0 °C

for 20°C to the mentioned temperature

1.25E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.25E-5 1/K at 450.0 °C

450.0 °C

for 20°C to the mentioned temperature

1.26E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.26E-5 1/K at 500.0 °C

500.0 °C

for 20°C to the mentioned temperature

Thermal conductivity

22.6 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 22.6 W/(m·K) at 23.0 °C

23.0 °C

24 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 24 W/(m·K) at 150.0 °C

150.0 °C

24.6 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 24.6 W/(m·K) at 300.0 °C

300.0 °C

24.9 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 24.9 W/(m·K) at 350.0 °C

350.0 °C

24.4 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 24.4 W/(m·K) at 400.0 °C

400.0 °C

23.7 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 23.7 W/(m·K) at 500.0 °C

500.0 °C

Unlock all property charts

Chemical properties

Property

Carbon

0.4 %

Chromium

13.5 %

Iron

Balance

Manganese

0.9 %

Silicon

0.35 %

Technological properties

Property
Application areas

Moulds and inserts for processing corrosive acting plastics.

Heat Treatment

Soft annealing: 760-800°C (Cooling in furnace) - Hardening: 1000-1050°C and quenching in air, oil or hot bath T=500-550°C