Formadur PH X Superclean Plate

Alternative and trade names
X5CrNiCuNb15-5
Want to keep this datasheet? Save it now in your required format

Description

(X5CrNiCuNb15-5) Formadur PH X Superclean precipitation hardened steel has improved corrosion-resistance, high strength, excellent polishability due to the applied remelting process.

Equivalent Materials

This material data has been provided by Deutsche Edelstahlwerke Specialty Steel (DEW).

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

Dimension

PropertyValue

Thickness

200 - 500 mm

Show Supplier Material materials with Thickness of 200 - 500 mm

Width

900 - 1100 mm

Show Supplier Material materials with Width of 900 - 1100 mm

Mechanical

PropertyValueTemperature

Hardness, Rockwell C

38 - 42 [-]

Show Supplier Material materials with Hardness, Rockwell C of 38 - 42 [-] at 23.0 °C

23.0 °C

Tensile strength

1190 - 1320 MPa

Show Supplier Material materials with Tensile strength of 1190 - 1320 MPa at 23.0 °C

23.0 °C

Thermal

PropertyValueTemperatureComment

Coefficient of thermal expansion

1.04E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.04E-5 1/K at 100.0 °C

100.0 °C

for 20°C to the mentioned temperature

1.06E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.06E-5 1/K at 150.0 °C

150.0 °C

for 20°C to the mentioned temperature

1.09E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.09E-5 1/K at 200.0 °C

200.0 °C

for 20°C to the mentioned temperature

1.11E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.11E-5 1/K at 250.0 °C

250.0 °C

for 20°C to the mentioned temperature

1.14E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.14E-5 1/K at 300.0 °C

300.0 °C

for 20°C to the mentioned temperature

1.15E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.15E-5 1/K at 350.0 °C

350.0 °C

for 20°C to the mentioned temperature

1.17E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.17E-5 1/K at 400.0 °C

400.0 °C

for 20°C to the mentioned temperature

1.19E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.19E-5 1/K at 450.0 °C

450.0 °C

for 20°C to the mentioned temperature

1.2E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.2E-5 1/K at 500.0 °C

500.0 °C

for 20°C to the mentioned temperature

Thermal conductivity

16.8 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 16.8 W/(m·K) at 23.0 °C

23.0 °C

20.1 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 20.1 W/(m·K) at 150.0 °C

150.0 °C

22.1 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 22.1 W/(m·K) at 300.0 °C

300.0 °C

22.8 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 22.8 W/(m·K) at 350.0 °C

350.0 °C

23.3 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 23.3 W/(m·K) at 400.0 °C

400.0 °C

24.1 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 24.1 W/(m·K) at 500.0 °C

500.0 °C

Unlock all property charts

Chemical properties

Property

Carbon

0.05 %

Chromium

15 %

Iron

Balance

Manganese

0.3 %

Nickel

4.5 %

Other

3.50 Cu + Nb

Silicon

0.3 %

Technological properties

Property
Application areas

High polished tools and moulds for processing of high corrosive plastics, tools for plastic extrusion.

Heat Treatment

Formadur PH X Superclean usually is supplied in precipitation-hardened condition with a hardness of 40 HRC.