Formadur 2738 Plate

Alternative and trade names
DIN EN ISO 40CrMnNiMo8-6-4, AISI P20+Ni, 1.2738
Want to keep this datasheet? Save it now in your required format

Description

1.2738 (40CrMnNiMo8-6-4) is a plastic mould steel, improved through hardening with good machinability, good polishability and suitable for texturing.

Equivalent Materials

This material data has been provided by Deutsche Edelstahlwerke Specialty Steel (DEW).

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

Dimension

PropertyValueThickness

Thickness

30.0 mm

Show Supplier Material materials with Thickness of 30.0 mm

30.0 mm

430.0 mm

Show Supplier Material materials with Thickness of 430.0 mm

430.0 mm

Width

1050 mm

Show Supplier Material materials with Width of 1050 mm

Mechanical

PropertyValueComment

Hardness, Brinell

280.0 - 325.0 [-]

Show Supplier Material materials with Hardness, Brinell of 280.0 - 325.0 [-]

as-delivered condition

Hardness, Rockwell C

28.0 - 51.0 [-]

Show Supplier Material materials with Hardness, Rockwell C of 28.0 - 51.0 [-]

Tensile strength

950.0 - 1095.0 MPa

Show Supplier Material materials with Tensile strength of 950.0 - 1095.0 MPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

100 °C

0.0000111 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 0.0000111 1/K

for 20°C to the mentioned temperature

200 °C

0.0000129 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 0.0000129 1/K

for 20°C to the mentioned temperature

300 °C

0.0000134 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 0.0000134 1/K

for 20°C to the mentioned temperature

400 °C

0.0000138 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 0.0000138 1/K

for 20°C to the mentioned temperature

500 °C

0.0000142 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 0.0000142 1/K

for 20°C to the mentioned temperature

600 °C

0.0000156 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 0.0000156 1/K

for 20°C to the mentioned temperature

700 °C

0.0000149 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 0.0000149 1/K

for 20°C to the mentioned temperature

Thermal conductivity

23 °C

34.5 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 34.5 W/(m·K)

150 °C

33.5 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 33.5 W/(m·K)

300 °C

32 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 32 W/(m·K)

Unlock all property charts

Chemical properties

PropertyValue

Carbon

0.4

Show Supplier Material materials with Carbon of 0.4

Chromium

1.9

Show Supplier Material materials with Chromium of 1.9

Manganese

1.5

Show Supplier Material materials with Manganese of 1.5

Molybdenum

0.2

Show Supplier Material materials with Molybdenum of 0.2

Nickel

1.0

Show Supplier Material materials with Nickel of 1.0

Silicon

0.30000000000000004

Show Supplier Material materials with Silicon of 0.30000000000000004

Technological properties

Property
Application areas

Large plastic moulds, mould frames for plastic moulds and die casting moulds

Heat Treatment

Soft annealing: 710-740°C (Cooling in furnace) - Hardening: 840-870°C and quenching in oil or polymer