Thermodur 2344 EFS Plate

Alternative and trade names
DIN EN ISO X40CrMoV5-1, 1.2344, AISI H13, AFNOR Z40CDV5
Want to keep this datasheet? Save it now in your required format

Description

1.2344 (X40CrMoV5-1) is a steel plate with high hot-wear resistance, hot tensile strength, good toughness & thermal conductivity and insusceptibility to hot cracking. Can be water-cooled to a limited extent.

Equivalent Materials

This material data has been provided by Deutsche Edelstahlwerke Specialty Steel (DEW).

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

Dimension

PropertyValue

Thickness

30 - 500 mm

Show Supplier Material materials with Thickness of 30 - 500 mm

Width

800 - 1010 mm

Show Supplier Material materials with Width of 800 - 1010 mm

Mechanical

PropertyValueTemperatureComment

Hardness, Brinell

230 [-]

Show Supplier Material materials with Hardness, Brinell of 230 [-] at 23.0 °C

23.0 °C

soft annealed

Hardness, Rockwell C

42 - 52 [-]

Show Supplier Material materials with Hardness, Rockwell C of 42 - 52 [-] at 23.0 °C

23.0 °C

Tensile strength

1320 - 1775 MPa

Show Supplier Material materials with Tensile strength of 1320 - 1775 MPa at 23.0 °C

23.0 °C

Thermal

PropertyValueTemperatureComment

Coefficient of thermal expansion

1.09E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.09E-5 1/K at 100.0 °C

100.0 °C

for 20°C to the mentioned temperature

1.19E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.19E-5 1/K at 200.0 °C

200.0 °C

for 20°C to the mentioned temperature

1.23E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.23E-5 1/K at 300.0 °C

300.0 °C

for 20°C to the mentioned temperature

1.27E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.27E-5 1/K at 400.0 °C

400.0 °C

for 20°C to the mentioned temperature

1.3E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.3E-5 1/K at 500.0 °C

500.0 °C

for 20°C to the mentioned temperature

1.33E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.33E-5 1/K at 600.0 °C

600.0 °C

for 20°C to the mentioned temperature

1.35E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.35E-5 1/K at 700.0 °C

700.0 °C

for 20°C to the mentioned temperature

Thermal conductivity

25.5 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 25.5 W/(m·K) at 20.0 °C

20.0 °C

27.6 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 27.6 W/(m·K) at 350.0 °C

350.0 °C

30.3 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 30.3 W/(m·K) at 700.0 °C

700.0 °C

Unlock all property charts

Chemical properties

Property

Carbon

0.4 %

Chromium

5.3 %

Iron

Balance

Manganese

0.4 %

Silicon

1 %

Vanadium

1 %

Technological properties

Property
Application areas

Universally usable e.g. casting dies and moulds for light metal processing, mandrel bars, forging dies and inserts, hot shear blades, ejector pins and extrusion tools

Heat Treatment

Soft annealing: 750-800°C (Cooling in furnace) - Stress-relief annealing 600-650°C (Cooling in furnace) - Hardening: 1020-1050°C and quenching in air, oil or hot bath T=500-550°C