Show me around

Thermodur 2367 EFS Bar

Alternative and trade names
DIN EN ISO X38CrMoV5-3, 1.2367
Want to keep this datasheet? Save it now in your required format

Description

1.2367 (X38CrMoV5-3) is a steel bar shows the following features and properties:


  • Excellent high-temperature strength
  • Excellent tempering resistance
  • Good hardenability
  • Minimal warpage
  • Equivalent Materials

    Properties

    Dimension

    Diameter

    d

    25.8 - 453 mm

    Mechanical

    Hardness, Brinell

    HB

    235 [-] at 20 °C

    Show Tool And Machining Steel materials with Hardness, Brinell of 235 [-] at 20 °C

    soft annealed

    Hardness, Rockwell C

    HRC

    42 - 52 [-] at 20 °C

    Show Tool And Machining Steel materials with Hardness, Rockwell C of 42 - 52 [-] at 20 °C

    Tensile strength

    Rm

    1320 - 1775 MPa at 20 °C

    Show Tool And Machining Steel materials with Tensile strength of 1320 - 1775 MPa at 20 °C

    Thermal

    Coefficient of thermal expansion

    α

    1.19E-5 1/K at 100 °C

    for 20°C to the mentioned temperature

    Hide chart

    Thermal conductivity

    λ

    29.8 W/(m·K) at 20 °C

    Unlock all property charts

    Chemical properties

    Element

    Weight %

    Comment

    Fe

    -

    Balance

    Cr

    5 %

    V

    0.6 %

    Mn

    0.4 %

    C

    0.37 %

    More

    Technological properties

    Application areas

    Casting dies and extrusion dies for light and heavy metal processing, dies and inserts, high speed forging machines

    Heat Treatment

    Soft annealing: 730-880°C (Cooling in furnace) - Hardening: 1020-1050°C and quenching in air, oil or hot bath T=500-550°C

    Do you need more data regarding this material?

    This material data has been provided by Deutsche Edelstahlwerke Specialty Steel (DEW).

    All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
    Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.