Thermodur 2383 Supercool Plate

Want to keep this datasheet? Save it now in your required format

Description

Quenched and Tempered steel plate that shows the following features and properties:


  • Outstanding thermal conductivity
  • Good wear resistance
  • Good through-hardenabilty
  • Best long-time tempering resistance
  • Good high-temperature strength
  • This material data has been provided by Deutsche Edelstahlwerke Specialty Steel (DEW).

    All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
    Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

    Ashby charts

    Properties

    Dimension

    PropertyValueThickness

    Thickness

    300.0 mm

    Show Supplier Material materials with Thickness of 300.0 mm

    300.0 mm

    420.0 mm

    Show Supplier Material materials with Thickness of 420.0 mm

    420.0 mm

    Width

    800.0 mm

    Show Supplier Material materials with Width of 800.0 mm

    950.0 mm

    Show Supplier Material materials with Width of 950.0 mm

    Mechanical

    PropertyValueComment

    Hardness, Brinell

    220.0

    Show Supplier Material materials with Hardness, Brinell of 220.0

    soft annealed

    Hardness, Rockwell C

    40.0 - 52.0 [-]

    Show Supplier Material materials with Hardness, Rockwell C of 40.0 - 52.0 [-]

    Tensile strength

    1255.0 - 1775.0 MPa

    Show Supplier Material materials with Tensile strength of 1255.0 - 1775.0 MPa

    Thermal

    PropertyTemperatureValueComment

    Coefficient of thermal expansion

    100 °C

    0.000012 1/K

    Show Supplier Material materials with Coefficient of thermal expansion of 0.000012 1/K

    for 20°C to the mentioned temperature

    200 °C

    0.0000123 1/K

    Show Supplier Material materials with Coefficient of thermal expansion of 0.0000123 1/K

    for 20°C to the mentioned temperature

    300 °C

    0.0000127 1/K

    Show Supplier Material materials with Coefficient of thermal expansion of 0.0000127 1/K

    for 20°C to the mentioned temperature

    400 °C

    0.0000131 1/K

    Show Supplier Material materials with Coefficient of thermal expansion of 0.0000131 1/K

    for 20°C to the mentioned temperature

    Thermal conductivity

    100 °C

    44 W/(m·K)

    Show Supplier Material materials with Thermal conductivity of 44 W/(m·K)

    200 °C

    43 W/(m·K)

    Show Supplier Material materials with Thermal conductivity of 43 W/(m·K)

    300 °C

    41 W/(m·K)

    Show Supplier Material materials with Thermal conductivity of 41 W/(m·K)

    400 °C

    39 W/(m·K)

    Show Supplier Material materials with Thermal conductivity of 39 W/(m·K)

    Unlock all property charts

    Chemical properties

    PropertyValue

    Carbon

    0.45

    Show Supplier Material materials with Carbon of 0.45

    Chromium

    1.5

    Show Supplier Material materials with Chromium of 1.5

    Manganese

    0.9

    Show Supplier Material materials with Manganese of 0.9

    Nickel

    0.9

    Show Supplier Material materials with Nickel of 0.9

    Vanadium

    1.5

    Show Supplier Material materials with Vanadium of 1.5

    Technological properties

    Property
    Application areas

    Special steel for press hardening, also useable for small plastic injection moulds

    Heat Treatment

    Soft annealing: 860°C (Cooling in furnace) - Hardening: 1080-1120°C and quenching in air, oil or hot bath T=500-550°C