Cryodur 2709 Plate

Alternative and trade names
DIN EN ISO X3NiCoMo-Ti18-9-5, 1.2709

Want to keep this datasheet? Save it now in your required format

Description

1.2709 (X3NiCoMoTi18-9-5) Percipitation Hardened steel plate with high yield point and tensile strength combined with good toughness.

Equivalent Materials

This material data has been provided by Deutsche Edelstahlwerke Specialty Steel (DEW).

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

Dimension

Property	Value
Thickness	150 mm Show Supplier Material materials with Thickness of 150 mm
Width	150 mm Show Supplier Material materials with Width of 150 mm

Mechanical

Property	Value	Comment
Hardness, Brinell	340 [-] Show Supplier Material materials with Hardness, Brinell of 340 [-]	soft annealed
Hardness, Rockwell C	51 - 55 [-] Show Supplier Material materials with Hardness, Rockwell C of 51 - 55 [-]
Tensile strength	1740 - 1995 MPa Show Supplier Material materials with Tensile strength of 1740 - 1995 MPa

Thermal

Property	Temperature	Value	Comment
Coefficient of thermal expansion	100 °C	1.03e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.03e-05 1/K	for 20°C to the mentioned temperature
	200 °C	1.1e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.1e-05 1/K	for 20°C to the mentioned temperature
	300 °C	1.12e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.12e-05 1/K	for 20°C to the mentioned temperature
	400 °C	1.15e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.15e-05 1/K	for 20°C to the mentioned temperature
	500 °C	1.18e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.18e-05 1/K	for 20°C to the mentioned temperature
	600 °C	1.16e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.16e-05 1/K	for 20°C to the mentioned temperature
Thermal conductivity	20 °C	14.2 W/(m·K) Show Supplier Material materials with Thermal conductivity of 14.2 W/(m·K)
	350 °C	18.5 W/(m·K) Show Supplier Material materials with Thermal conductivity of 18.5 W/(m·K)
	700 °C	22.5 W/(m·K) Show Supplier Material materials with Thermal conductivity of 22.5 W/(m·K)

Chemical properties

Property	Value
Carbon	0.02 % Show Supplier Material materials with Carbon of 0.02 %
Cobalt	10 % Show Supplier Material materials with Cobalt of 10 %
Iron	Balance
Molybdenum	5 % Show Supplier Material materials with Molybdenum of 5 %
Nickel	18 % Show Supplier Material materials with Nickel of 18 %
Titanium	1 % Show Supplier Material materials with Titanium of 1 %

Technological properties

Property

Application areas

Casings for cold extrusion tools, casting dies, plastic moulds

Heat Treatment

Soft annealing: 820-850°C (Cooling in furnace) - Percipitation temperature: 490°C, 4hr in air

Cryodur 2709 Plate

Description

Equivalent Materials

Ashby charts

Applications

Materials by this supplier

Use cases

Properties