Printdur® Powderfort Heat Treated

Alternative and trade names
1.2709
Want to keep this datasheet? Save it now in your required format

Description

Printdur® Powderfort (~1.2709) is a precipitation-hardening tool steel that shows the following properties:


  • Good processability with LPBF.
  • High yield and tensile strength combined with good toughness.
  • Simple and distortion-free heat treatment.
  • High hardness of approx. 52 HRC after heat treatment.

  • These properties make Printdur® Powderfort the first choice when components exposed to high mechanical stresses and produced by Additive Manufacturing.

    Equivalent Materials

    This material data has been provided by Deutsche Edelstahlwerke Specialty Steel (DEW).

    All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
    Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

    Ashby charts

    Properties

    General

    PropertyValue

    Bulk density

    3.8 - 4.6 g/cm³

    Show Supplier Material materials with Bulk density of 3.8 - 4.6 g/cm³

    Particle size range

    20.0 - 53.0 µm

    Show Supplier Material materials with Particle size range of 20.0 - 53.0 µm

    Mechanical

    PropertyValue

    Hardness, Rockwell C

    52.0

    Show Supplier Material materials with Hardness, Rockwell C of 52.0

    Tensile strength

    2050.0 - 2150.0 MPa

    Show Supplier Material materials with Tensile strength of 2050.0 - 2150.0 MPa

    Rheological Properties

    PropertyValue

    Hall flow

    12 s/50g

    Show Supplier Material materials with Hall flow of 12 s/50g

    20 s/50g

    Show Supplier Material materials with Hall flow of 20 s/50g

    Chemical properties

    PropertyValue

    Carbon

    0.02

    Show Supplier Material materials with Carbon of 0.02

    Cobalt

    13.5

    Show Supplier Material materials with Cobalt of 13.5

    Manganese

    0.5

    Show Supplier Material materials with Manganese of 0.5

    Molybdenum

    5.0

    Show Supplier Material materials with Molybdenum of 5.0

    Nickel

    18.0

    Show Supplier Material materials with Nickel of 18.0

    Silicon

    0.5

    Show Supplier Material materials with Silicon of 0.5

    Technological properties

    Property
    Application areas

    Additive manufacturing

    Processing history

    The powder is produced by gas atomization.

    Processing methods

    Der Printdur® Powderfort can be processed on LPBF systems. The process parameters are similar to those of 1.2709. Please contact us for further information.